GET MORE WITH ELCRES™ HTV150A DIELECTRIC FILMS FOR DC-LINK POWER CAPACITORS AT 150°C
HOTTER TEMPERATURES
HIGHER EFFICIENCY
LOWER LOSSES
SABIC’s ELCRES™ HTV150A dielectric film offers high temperature solutions for professional grade DC-Link power capacitors, addressing future high voltage industry requirements.
ELCRES HTV150A dielectric film exhibits stable performance at -40°C to +150°C and frequency up to 100 kHz, including:
- Stable capacitance
- Good insulation resistance
- Stable dielectric constant (Dk)
- Low dissipation factor (Df)
SABIC’s HTV150A dielectric film has been validated by customers with both film-foil and metalized electrodes, including flat aluminum, heavy edge/light body and fused/patterned electrode designs. ELCRES HTV150A dielectric film can be processed on existing metallization, slitting, capacitor winding and squashing/flattening equipment.
Capacitors made with HTV150A films meet damp heat aging requirements (85°C & 85%RH for 1000 hours) with little or no change in dielectric performance.
KEY FEATURES & BENEFITS
- High Dk and low Df up to 150°C and 100 kHz
- High breakdown strength from -40°C to 150°C
- Good self-healing up to 150°C
- Excellent metal adhesion (Al, Zn)
- Decreasing dielectric losses at higher temperatures
- 3 and 5 μm gauge (+/- 5%-gauge uniformity)
- Empowers wide-bandgap (WBG) semiconductors.
POTENTIAL APPLICATIONS
- xEV traction inverter
- xEV on board charger
- xEV electrical compressor
- Renewable energy
- Mass transportation
- Motor drive and control
- Deep well drilling
PRODUCTS AND GRADES
CONTACT US
Reach out to us for one-on-one support to ensure you have all the information and insights you need to choose the best-fit material for your application.
DISCLAIMER: ANY SALE BY SABIC, ITS SUBSIDIARIES AND AFFILIATES (EACH A “SELLER”), IS MADE EXCLUSIVELY UNDER SELLER’S STANDARD CONDITIONS OF SALE (AVAILABLE UPON REQUEST) UNLESS AGREED OTHERWISE IN WRITING AND SIGNED ON BEHALF OF THE SELLER. WHILE THE INFORMATION CONTAINED HEREIN IS GIVEN IN GOOD FAITH, SELLER MAKES NO WARRANTY, EXPRESS OR IMPLIED, INCLUDING MERCHANTABILITY AND NONINFRINGEMENT OF INTELLECTUAL PROPERTY, NOR ASSUMES ANY LIABILITY, DIRECT OR INDIRECT, WITH RESPECT TO THE PERFORMANCE, SUITABILITY OR FITNESS FOR INTENDED USE OR PURPOSE OF THESE PRODUCTS IN ANY APPLICATION.
Each customer must determine the suitability of seller materials for the customer’s particular use through appropriate testing and analysis. No statement by seller concerning a possible use of any product, service or design is intended, or should be construed, to grant any license under any patent or other intellectual property right. SABIC and brands marked with ™ are trademarks of SABIC or its subsidiaries or affiliates, unless otherwise noted.
© 2024 Saudi Basic Industries Corporation (SABIC). All Rights Reserved.
Any brands, products or services of other companies referenced in this document are the trademarks, service marks and/or trade names of their respective holders.
Your PDF is downloading. Please wait.
Register for High value Multi-Point Data
- Access validated product data to streamline material selection
- Get inspired by innovative application ideas
- Register for high value multi-point data and a personalized experience
