FLAME CHARACTERISTICS
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
UL Recognized, 94V-2 Flame Class Rating | ≥1 | mm | UL 94 |
LEXAN EXL9414TRC resin grade is a 21% PCR(Post Consumer Recycle) contain halogen-free flame retardant polycarbonate featuring transparency, -40 degree C ductility and UL-94 V0 rating for injection molding applications. Excellent impact combined with good flow, all transparent colorability for aesthetics and thin wall flame retardant makes this product an excellent candidate for thin wall applications.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
UL Recognized, 94V-2 Flame Class Rating | ≥1 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 785 | J/m | ASTM D256 |
Izod Impact, notched, -30°C | 311 | J/m | ASTM D256 |
Instrumented Dart Impact Total Energy, 23°C | 65 | J | ASTM D3763 |
Izod Impact, unnotched 80*10*3 +23°C | NB | kJ/m² | ISO 180/1U |
Izod Impact, unnotched 80*10*3 -30°C | N | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*3 +23°C | 58 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*3 -30°C | 34 | kJ/m² | ISO 180/1A |
Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm | N | kJ/m² | ISO 179/1eU |
Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm | N | kJ/m² | ISO 179/1eU |
Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 64 | kJ/m² | ISO 179/1eA |
Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm | 24 | kJ/m² | ISO 179/1eA |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 3 - 4 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 295 - 315 | °C | |
Nozzle Temperature | 290 - 310 | °C | |
Front - Zone 3 Temperature | 295 - 315 | °C | |
Middle - Zone 2 Temperature | 280 - 305 | °C | |
Rear - Zone 1 Temperature | 270 - 295 | °C | |
Mold Temperature | 70 - 110 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 40 - 70 | rpm | |
Shot to Cylinder Size | 40 - 60 | % | |
Vent Depth | 0.025 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 50 mm/min | 55 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 50 mm/min | 56 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 50 mm/min | 5.6 | % | ASTM D638 |
Tensile Strain, brk, Type I, 50 mm/min | 96 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 2110 | MPa | ASTM D638 |
Flexural Stress, yld, 1.3 mm/min, 50 mm span | 86 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2160 | MPa | ASTM D790 |
Tensile Stress, yield, 50 mm/min | 56 | MPa | ISO 527 |
Tensile Stress, break, 50 mm/min | 54 | MPa | ISO 527 |
Tensile Strain, yield, 50 mm/min | 5.4 | % | ISO 527 |
Tensile Strain, break, 50 mm/min | 95 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2170 | MPa | ISO 527 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.19 | - | ASTM D792 |
Density | 1.19 | g/cm³ | ASTM D792 |
Melt Flow Rate, 300°C/1.2 kgf | 12 | g/10 min | ASTM D1238 |
Melt Volume Rate, MVR at 300°C/1.2 kg | 11 | cm³/10 min | ISO 1133 |
Mold Shrinkage, flow, 3.2 mm | 0.4 - 0.8 | % | SABIC method |
Water Absorption, (23°C/saturated) | 0.09 | % | ISO 62-1 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Vicat Softening Temp, Rate A/50 | 135 | °C | ASTM D1525 |
Vicat Softening Temp, Rate B/50 | 129 | °C | ISO 306 |
HDT, 1.82 MPa, 3.2mm, unannealed | 110 | °C | ASTM D648 |
CTE, -40°C to 95°C, flow | 6.70E-05 | 1/°C | ASTM E831 |
CTE, -40°C to 95°C, xflow | 8.00E-05 | 1/°C | ASTM E831 |
Relative Temp Index, Elec | 120 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 110 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 120 | °C | UL 746B |
Your PDF is downloading. Please wait.