ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Volume Resistivity | 1.E+02 | Ω.cm | ASTM D257 |
Surface Resistivity | 1.E+04 | Ω | ASTM D257 |
Hot-Wire Ignition (HWI), PLC 2 | 1 | mm | UL 746A |
LEXAN JK2500 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend containing 20% carbon fiber. Added features of this grade include: Electrically Conductive, EMI/RFI Shielding Effectiveness of 21 dB at 1.5 mm, Non-Brominated, Non-Chlorinated Flame Retardant.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Volume Resistivity | 1.E+02 | Ω.cm | ASTM D257 |
Surface Resistivity | 1.E+04 | Ω | ASTM D257 |
Hot-Wire Ignition (HWI), PLC 2 | 1 | mm | UL 746A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched 80*10*4 +23°C | 5 | kJ/m² | ISO 180/1A |
Izod Impact, unnotched 80*10*4 +23°C | 15 | kJ/m² | ISO 180/1U |
Izod Impact, notched, 23°C | 53 | J/m | ASTM D256 |
Izod Impact, unnotched, 23°C | 224 | J/m | ASTM D4812 |
Instrumented Dart Impact Total Energy, 23°C | 14 | J | ASTM D3763 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 - 90 | °C | |
Drying Time | 3 - 4 | Hrs | |
Drying Time (Cumulative) | 24 | Hrs | |
Melt Temperature | 270 - 310 | °C | |
Nozzle Temperature | 270 - 300 | °C | |
Front - Zone 3 Temperature | 270 - 300 | °C | |
Middle - Zone 2 Temperature | 270 - 290 | °C | |
Rear - Zone 1 Temperature | 260 - 275 | °C | |
Mold Temperature | 50 - 95 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 35 - 75 | rpm | |
Shot to Cylinder Size | 40 - 60 | % | |
Vent Depth | 0.038 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield, 5 mm/min | 63 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 63 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 2.2 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 2.3 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 11130 | MPa | ISO 527 |
Flexural Stress, yield, 2 mm/min | 110 | MPa | ISO 178 |
Flexural Stress, break, 2 mm/min | 110 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 10090 | MPa | ISO 178 |
Tensile Stress, yld, Type I, 5 mm/min | 63 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 5 mm/min | 63 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 5 mm/min | 2.3 | % | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 2.4 | % | ASTM D638 |
Tensile Modulus, 5 mm/min | 11030 | MPa | ASTM D638 |
Flexural Stress, brk, 1.3 mm/min, 50 mm span | 112 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 9230 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.31 | - | ASTM D792 |
Melt Flow Rate, 300°C/1.2 kgf | 25 | g/10 min | ASTM D1238 |
Mold Shrinkage, flow, 3.2 mm | 0.06 - 0.15 | % | SABIC method |
Mold Shrinkage, xflow, 3.2 mm | 0.2 - 0.4 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Vicat Softening Temp, Rate B/120 | 100 | °C | ISO 306 |
CTE, 23°C to 80°C, flow | 7.70E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 80°C, xflow | 8.0E-05 | 1/°C | ISO 11359-2 |
Vicat Softening Temp, Rate B/50 | 111 | °C | ASTM D1525 |
HDT, 0.45 MPa, 3.2 mm, unannealed | 98 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 93 | °C | ASTM D648 |
HDT, 1.82 MPa, 6.4 mm, unannealed | 96 | °C | ASTM D648 |
CTE, -40°C to 40°C, flow | 1.26E-05 | 1/°C | ASTM E831 |
CTE, -40°C to 40°C, xflow | 6.30E-05 | 1/°C | ASTM E831 |
Relative Temp Index, Elec | 60 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 60 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 60 | °C | UL 746B |
Your PDF is downloading. Please wait.