Antistatic colorable/opaque FR PC grade
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Surface Resistivity | 1.2E+12 | Ω | ASTM D257 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| UL Yellow Card Link | View | - | - |
| UL Recognized, 94V-2 Flame Class Rating | ≥1 | mm | UL 94 |
| UL Recognized, 94HB Flame Class Rating | ≥0.5 | mm | UL 94 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched, 23°C | 700 | J/m | ASTM D256 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 90 - 100 | °C | |
| Drying Time | 4 - 6 | Hrs | |
| Drying Time (Cumulative) | 8 | Hrs | |
| Maximum Moisture Content | 0.04 | % | |
| Melt Temperature | 240 - 260 | °C | |
| Nozzle Temperature | 230 - 260 | °C | |
| Front - Zone 3 Temperature | 230 - 260 | °C | |
| Middle - Zone 2 Temperature | 220 - 255 | °C | |
| Rear - Zone 1 Temperature | 220 - 245 | °C | |
| Mold Temperature | 30 - 70 | °C | |
| Back Pressure | 0.3 - 0.7 | MPa | |
| Screw Speed | 40 - 70 | rpm | |
| Shot to Cylinder Size | 30 - 80 | % | |
| Vent Depth | 0.38 - 0.76 | mm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yield, 50 mm/min | 52 | MPa | ASTM D638 |
| Flexural Stress, yield, 6.4 mm | 80 | MPa | ASTM D790 |
| Flexural Modulus | 2030 | MPa | ASTM D790 |
| Tensile Strain, break, 50 mm/min | 200 | % | ISO 527 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.21 | - | ASTM D792 |
| Mold Shrinkage, flow, 1.5-3.2 mm | 0.4 | % | SABIC method |
| Mold Shrinkage, xflow, 1.5-3.2 mm | 0.5 | % | SABIC method |
| Melt Flow Rate, 260°C/2.16 kgf | 19 | g/10 min | ASTM D1238 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 1.82 MPa, 6.4 mm, unannealed | 100 | °C | ASTM D648 |
Your PDF is downloading. Please wait.
