ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Dielectric Strength, in oil, 3.2 mm | 17 | kV/mm | ASTM D149 |
Relative Permittivity, 50/60 Hz | 2.95 | - | ASTM D150 |
Relative Permittivity, 1 MHz | 2.9 | - | ASTM D150 |
Dissipation Factor, 50/60 Hz | 0.0024 | - | ASTM D150 |
Dissipation Factor, 1 MHz | 0.0085 | - | ASTM D150 |
Volume Resistivity | >1e+15 | Ω.cm | IEC 60093 |
Surface Resistivity, ROA | >1e+15 | Ω | IEC 60093 |
Dielectric Strength, in oil, 3.2 mm | 16 | kV/mm | IEC 60243-1 |
Relative Permittivity, 1 MHz | 2.7 | - | IEC 60250 |
Dissipation Factor, 50/60 Hz | 0.001 | - | IEC 60250 |
Dissipation Factor, 1 MHz | 0.0085 | - | IEC 60250 |
Comparative Tracking Index | 225 | V | IEC 60112 |
Relative Permittivity, 50/60 Hz | 2.6 | - | IEC 60250 |
Comparative Tracking Index (UL) {PLC} | 3 | PLC Code | UL 746A |
Hot-Wire Ignition (HWI), PLC 1 | ≥3 | mm | UL 746A |
Hot-Wire Ignition (HWI), PLC 2 | ≥1.5 | mm | UL 746A |
Hot-Wire Ignition (HWI), PLC 3 | ≥0.6 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 0 | ≥2.3 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 1 | ≥0.6 | mm | UL 746A |