LNP™ ELCRES™ AMS9085

AMS9085 is a specially designed unreinforced polycarbonate copolymer compound that is very well suited for use as support material in 3D printing. Especially in combination with ULTEMTM resin 9085 but also with other high heat printing materials.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Additive manufacturing
3D printing
Fused Deposition Modeling (FDM) printing
Fibre and Filaments

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
High stiffness/Strength
High temperature resistance
Low Shrinkage
No PFAS intentionally added

Industry

Material previously used in

Applications

Possible usage of material

Prototype

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

EXTRUSION

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	135	°C
Drying Time	4 - 6	Hrs
Maximum Moisture Content	0.02	%
Melt Temperature	290 - 330	°C
Nozzle Temperature	290 - 330	°C
Barrel - Zone 3 Temperature	290 - 330	°C
Barrel - Zone 2 Temperature	280 - 320	°C
Barrel - Zone 1 Temperature	270 - 310	°C
Die Temperature	110 - 130	°C

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	8	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	137	kJ/m²	ISO 180/1U
Izod Impact, notched, 23°C	71	J/m	ASTM D256
Izod Impact, unnotched, 23°C	1690	J/m	ASTM D4812

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	135	°C
Drying Time	4 - 6	Hrs
Maximum Moisture Content	0.06	%
Melt Temperature	320 - 340	°C
Rear - Zone 1 Temperature	320 - 340	°C
Middle - Zone 2 Temperature	320 - 340	°C
Front - Zone 3 Temperature	310 - 330	°C
Nozzle Temperature	300 - 320	°C
Mold Temperature	120 - 140	°C
Back Pressure	0.2 - 0.7	MPa

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	2400	MPa	ISO 527
Tensile Stress, yield, 50 mm/min	70	MPa	ISO 527
Tensile Stress, break, 50 mm/min	61	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	6	%	ISO 527
Tensile Nominal Strain, break, 50 mm/min	80	%	ISO 527
Flexural Modulus, 2 mm/min	2400	MPa	ISO 178
Flexural Strength, 2 mm/min	104	MPa	ISO 178
Tensile Modulus, 50 mm/min	2200	MPa	ASTM D638
Tensile Stress, yld, Type I, 50 mm/min	70	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min	62	MPa	ASTM D638
Tensile Nominal Strain, brk, Type I, 50 mm/min	65	%	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	2500	MPa	ASTM D790
Flexural Strength, 1.3 mm/min, 50 mm span	104	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.15	g/cm³	ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs)	0.16	%	ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium)	0.18	%	ISO 62-4
Water Absorption, (23°C/saturated)	0.35	%	ISO 62-1
Specific Gravity	0.15	-	ASTM D792
Water Absorption, (23°C/24hrs)	0.18	%	ASTM D570
Water Absorption, (23°C/Saturated)	0.35	%	ASTM D570

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	159	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	173	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/50	180	°C	ISO 306
Vicat Softening Temp, Rate B/120	180	°C	ISO 306
CTE, 23°C to 50°C, flow	6.5E-5	1/°C	ISO 11359-2
CTE, 23°C to 50°C, xflow	6.5E-5	1/°C	ISO 11359-2
HDT, 1.82 MPa, 3.2mm, unannealed	157	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	172	°C	ASTM D648
Vicat Softening Temp, Rate B/50	180	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	180	°C	ASTM D1525
CTE, 23°C to 50°C, flow	6.5E-5	1/°C	ASTM E831
CTE, 23°C to 50°C, xflow	6.5E-5	1/°C	ASTM E831

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES