ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Hot-Wire Ignition (HWI), PLC 2 | ≥1.5 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 0 | ≥1.5 | mm | UL 746A |
LNP ELCRES CXL9030 is an unfilled, opaque, amorphous Polycarbonate (PC) copolymer resin suitable for Injection Moulding and Extrusion. This non-chlorinated and non-brominated flame-retardant grade has an 'All Colour' UL-94 V0 rating at 1.5 mm. It offers excellent low temperature ductility (-60°C) and is UV stabilized providing additional weathering capability. The grade has improved chemical resistance against a range of chemicals and is intended for a variety of mobility and industrial applications that need durability against chemicals.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Hot-Wire Ignition (HWI), PLC 2 | ≥1.5 | mm | UL 746A |
High Amp Arc Ignition (HAI), PLC 0 | ≥1.5 | mm | UL 746A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥1.5 | mm | UL 94 |
UV-light, water exposure/immersion | f1 | - | UL 746C |
Glow Wire Ignitability Temperature, 3.0 mm | 875 | °C | IEC 60695-2-13 |
Glow Wire Ignitability Temperature, 2.5 mm | 875 | °C | IEC 60695-2-13 |
Glow Wire Ignitability Temperature, 1.5 mm | 850 | °C | IEC 60695-2-13 |
Glow Wire Flammability Index, 3.0 mm | 960 | °C | IEC 60695-2-12 |
Glow Wire Flammability Index, 2.5 mm | 960 | °C | IEC 60695-2-12 |
Glow Wire Flammability Index, 1.5 mm | 960 | °C | IEC 60695-2-12 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact | |||
– Izod Impact, notched, 23°C | 890 | J/m | ASTM D256 |
– Izod Impact, notched, -30°C | 800 | J/m | ASTM D256 |
– Izod Impact, unnotched, 23°C | NB | J/m | ASTM D4812 |
– Izod Impact, unnotched, -30°C | NB | J/m | ASTM D4812 |
– Izod Impact, notched 80*10*4 +23°C | 80 | kJ/m² | ISO 180/1A |
– Izod Impact, notched 80*10*4 -30°C | 70 | kJ/m² | ISO 180/1A |
– Izod Impact, notched 80*10*4 -60°C | 40 | kJ/m² | ISO 180/1A |
– Izod Impact, unnotched 80*10*4 +23°C | NB | kJ/m² | ISO 180/1U |
– Izod Impact, unnotched 80*10*4 -30°C | NB | kJ/m² | ISO 180/1U |
– Izod Impact, notched 80*10*3 +23°C | 80 | kJ/m² | ISO 180/1A |
– Izod Impact, notched 80*10*3 -30°C | 60 | kJ/m² | ISO 180/1A |
– Izod Impact, notched 80*10*3 -60°C | 40 | kJ/m² | ISO 180/1A |
– Izod Impact, unnotched 80*10*3 +23°C | NB | kJ/m² | ISO 180/1U |
– Izod Impact, unnotched 80*10*3 -30°C | NB | kJ/m² | ISO 180/1U |
Charpy | |||
– Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 70 | kJ/m² | ISO 179/1eA |
– Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 60 | kJ/m² | ISO 179/1eA |
– Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm | NB | kJ/m² | ISO 179/1eU |
– Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm | NB | kJ/m² | ISO 179/1eU |
Instrumented Dart Impact Total Energy, 23°C | 70 | J | ASTM D3763 |
Instrumented Dart Impact Total Energy, -30°C | 70 | J | ASTM D3763 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 2 - 4 | Hrs | |
Drying Time (Cumulative) | 12 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 275 - 315 | °C | |
Nozzle Temperature | 275 - 305 | °C | |
Front - Zone 3 Temperature | 275 - 315 | °C | |
Middle - Zone 2 Temperature | 275 - 305 | °C | |
Rear - Zone 1 Temperature | 275 - 305 | °C | |
Mold Temperature | 80 - 100 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 60 - 100 | rpm | |
Shot to Cylinder Size | 40 - 60 | % | |
Vent Depth | 0.025 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 50 mm/min | 57 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 50 mm/min | 66 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 50 mm/min | 6 | % | ASTM D638 |
Tensile Strain, brk, Type I, 50 mm/min | >100 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 2100 | MPa | ASTM D638 |
Flexural Strength, 1.3 mm/min, 50 mm span | 85 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2150 | MPa | ASTM D790 |
Tensile Stress, yield, 50 mm/min | 53 | MPa | ISO 527 |
Tensile Stress, break, 50 mm/min | 62 | MPa | ISO 527 |
Tensile Strain, yield, 50 mm/min | 6 | % | ISO 527 |
Tensile Strain, break, 50 mm/min | >100 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2100 | MPa | ISO 527 |
Flexural Strength, 2 mm/min | 80 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 2100 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.18 | - | ASTM D792 |
Density | 1.18 | g/cm³ | ISO 1183 |
Melt Flow Rate, 300°C/2.16 kgf | 10 | g/10 min | ASTM D1238 |
Melt Volume Rate, MVR at 300°C/2.16 kg | 12 | cm³/10 min | ISO 1133 |
Melt Volume Rate, MVR at 300°C/5.0 kg | 28 | cm³/10 min | ISO 1133 |
Melt Volume Rate, MVR at 330°C/2.16kg | 27 | cm³/10 min | ISO 1133 |
Water Absorption, (23°C/24hrs) | 0.15 | % | ASTM D570 |
Moisture Absorption, (23°C/50% RH/24 hrs) | 0.10 | % | ASTM D570 |
Water Absorption, (23°C/saturated) | 0.40 | % | ISO 62-1 |
Moisture Absorption, (23°C/50% RH/Equilibrium) | 0.15 | % | ISO 62-4 |
Mold Shrinkage, flow | 0.5 - 0.9 | % | SABIC method |
Mold Shrinkage, xflow | 0.5 - 0.9 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 138 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 125 | °C | ASTM D648 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 138 | °C | ISO 75/Bf |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 125 | °C | ISO 75/Af |
CTE, 23°C to 50°C, flow | 7.5E-05 | 1/°C | ASTM E831 |
CTE, 23°C to 50°C, xflow | 9.0E-05 | 1/°C | ASTM E831 |
CTE, 23°C to 50°C, flow | 7.5E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 50°C, xflow | 9.0E-05 | 1/°C | ISO 11359-2 |
Vicat Softening Temp, Rate A/50 | 153 | °C | ASTM D1525 |
Vicat Softening Temp, Rate A/120 | 153 | °C | ASTM D1525 |
Vicat Softening Temp, Rate B/50 | 145 | °C | ASTM D1525 |
Vicat Softening Temp, Rate B/120 | 145 | °C | ASTM D1525 |
Vicat Softening Temp, Rate A/50 | 153 | °C | ISO 306 |
Vicat Softening Temp, Rate A/120 | 153 | °C | ISO 306 |
Vicat Softening Temp, Rate B/50 | 145 | °C | ISO 306 |
Vicat Softening Temp, Rate B/120 | 145 | °C | ISO 306 |
Ball Pressure Test, 125°C +/- 2°C | PASSES | - | IEC 60695-10-2 |
Relative Temp Index, Elec | 125 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 115 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 125 | °C | UL 746B |
Your PDF is downloading. Please wait.