LNP™ ELCRES™ SLX2271AML

LNP ELCRES SLX2271AML is a polycarbonate (PC) copolymer resin containing antimicrobial additives. It has excellent weatherability and good scratch resistance performance, and available in transparent or tinted colors, fit for wide range of electronics, mobility or other adjacent applications.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

No PFAS intentionally added
Scratch Resistance
Weatherable/UV stable

Industry

Material previously used in

Building Component
Consumer Goods
Home Appliances
Industrial Packaging
Mobile Phone - Computer - Tablets
Personal Accessory
Personal and Professional Hygiene
Personal Recreation

Applications

Possible usage of material

All-Terrain Vehicle
Antenna
Battery Pack
Circuit Protection
City
Cowl Vent Grille
Displays
Doors Hardware/Trim
Electronic Components
Enclosure/Housing/Cover
Enclosures
Energy Management
Exterior Trim
Exterior
Front Grille
Heavy Vehicles
Interior
Lawn/Garden
LED Lighting
Meter Water
Non-LED Lighting
Oil/Gas
Personal Computing
Plumbing
Power Boat
Recreational Vehicle
Small Appliance
Smart/ID Card
Spoiler
Wiring Devices

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, unnotched, 23°C	NB	J/m	ASTM D4812
Izod Impact, notched, 23°C	119	J/m	ASTM D256
Izod Impact, notched, -30°C	89.5	J/m	ASTM D256
Instrumented Dart Impact Total Energy, 23°C	66.1	J	ASTM D3763
*Izod Impact, unnotched 80103 +23°C*	NB	kJ/m²	ISO 180/1U
*Izod Impact, notched 80103 +23°C*	13.5	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 -30°C*	9.3	kJ/m²	ISO 180/1A
*Charpy 23°C, V-notch Edgew 80103 sp=62mm*	13.6	kJ/m²	ISO 179/1eA
*Charpy -30°C, V-notch Edgew 80103 sp=62mm*	9.2	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80103 sp=62mm*	NB	kJ/m²	ISO 179/1eU

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	120	°C
Drying Time	2 - 4	Hrs
Maximum Moisture Content	0.02	%
Melt Temperature	280 - 310	°C
Nozzle Temperature	270 - 290	°C
Front - Zone 3 Temperature	280 - 310	°C
Middle - Zone 2 Temperature	270 - 290	°C
Rear - Zone 1 Temperature	260 - 280	°C
Hopper Temperature	60 - 80	°C
Mold Temperature	80 - 110	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yld, Type I, 50 mm/min	61.9	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min	61.3	MPa	ASTM D638
Tensile Strain, yld, Type I, 50 mm/min	6	%	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min	93	%	ASTM D638
Tensile Modulus, 5 mm/min	2368	MPa	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	102	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	2360	MPa	ASTM D790
Tensile Stress, yield, 50 mm/min	61.6	MPa	ISO 527
Tensile Stress, break, 50 mm/min	62	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	6	%	ISO 527
Tensile Strain, break, 50 mm/min	99.7	%	ISO 527
Tensile Modulus, 1 mm/min	2382	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	82.3	MPa	ISO 178
Flexural Modulus, 2 mm/min	2487	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.2	-	ASTM D792
Mold Shrinkage, flow, 3.2 mm	0.5 - 0.8	%	SABIC method
Melt Flow Rate, 300°C/1.2 kgf	20	g/10 min	ASTM D1238
Density	1.2	g/cm³	ISO 1183
Melt Volume Rate, MVR at 300°C/1.2 kg	22	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Vicat Softening Temp, Rate B/50	140	°C	ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed	121	°C	ASTM D648
CTE, -40°C to 40°C, flow	7.5E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	7.5E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	7.7E-5	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	7.6E-5	1/°C	ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C	PASS	-	IEC 60695-10-2
Vicat Softening Temp, Rate B/50	141	°C	ISO 306
Vicat Softening Temp, Rate B/120	141	°C	ISO 306

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES