Sustainable Grade
LNP ELCRIN 610009UXiQ compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, utilizing ELCRIN iQ upcycling technology containing minimum 19% Post-Consumer Recycling (PCR) weight content. Added features of this grade include: Flame Retardant, UL746C F1 Rating, UL94 V0 and 5VA Flame Rating, UV Resistant, Impact Modified, Excellent Chemical Resistance. This is a good candidate for applications in the electrical industry including bobbins, switches, and enclosures.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Comparative Tracking Index (UL) {PLC} | 2 | PLC Code | UL 746A |
| Arc Resistance, Tungsten {PLC} | 6 | PLC Code | ASTM D495 |
| High Voltage Arc Track Rate {PLC} | 4 | PLC Code | UL 746A |
| Hot-Wire Ignition (HWI), PLC 2 | ≥3 | mm | UL 746A |
| Hot-Wire Ignition (HWI), PLC 3 | ≥0.63 | mm | UL 746A |
| Hot-Wire Ignition (HWI), PLC 4 | ≥0.46 | mm | UL 746A |
| High Amp Arc Ignition (HAI), PLC 3 | ≥1.5 | mm | UL 746A |
| High Amp Arc Ignition (HAI), PLC 4 | ≥0.46 | mm | UL 746A |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| UL Yellow Card Link | View | - | - |
| UL Yellow Card Link 2 | View | - | - |
| UL Yellow Card Link 3 | View | - | - |
| UL Yellow Card Link 4 | View | - | - |
| UL Yellow Card Link 5 | View | - | |
| UL Recognized, 94-5VA Flame Class Rating | ≥2.5 | mm | UL 94 |
| UL Recognized, 94V-0 Flame Class Rating | 0.63 | mm | UL 94 |
| UL Recognized, 94HB Flame Class Rating | 0.46 | mm | UL 94 |
| UV-light, water exposure/immersion | F1 | - | UL 746C |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched, 23°C | 490 | J/m | ASTM D256 |
| Izod Impact, notched, -30°C | 167 | J/m | ASTM D256 |
| Instrumented Dart Impact Total Energy, 23°C | 50 | J | ASTM D3763 |
| Izod Impact, notched 80*10*4 +23°C | 31 | kJ/m² | ISO 180/1A |
| Izod Impact, notched 80*10*4 -30°C | 10 | kJ/m² | ISO 180/1A |
| Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 34 | kJ/m² | ISO 179/1eA |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3 - 4 | Hrs | |
| Drying Time (Cumulative) | 12 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 250 - 265 | °C | |
| Nozzle Temperature | 245 - 260 | °C | |
| Front - Zone 3 Temperature | 250 - 265 | °C | |
| Middle - Zone 2 Temperature | 245 - 260 | °C | |
| Rear - Zone 1 Temperature | 240 - 255 | °C | |
| Mold Temperature | 50 - 75 | °C | |
| Back Pressure | 0.3 - 0.7 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Shot to Cylinder Size | 40 - 80 | % | |
| Vent Depth | 0.025 - 0.038 | mm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yld, Type I, 50 mm/min | 48 | MPa | ASTM D638 |
| Tensile Stress, brk, Type I, 50 mm/min | 41 | MPa | ASTM D638 |
| Tensile Strain, yld, Type I, 50 mm/min | 4.9 | % | ASTM D638 |
| Tensile Strain, brk, Type I, 50 mm/min | 74 | % | ASTM D638 |
| Tensile Modulus, 5 mm/min | 2000 | MPa | ASTM D638 |
| Flexural Stress, yld, 1.3 mm/min, 50 mm span | 75 | MPa | ASTM D790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 2100 | MPa | ASTM D790 |
| Tensile Stress, yield, 50 mm/min | 48 | MPa | ISO 527 |
| Tensile Stress, break, 50 mm/min | 40 | MPa | ISO 527 |
| Tensile Strain, yield, 50 mm/min | 4.6 | % | ISO 527 |
| Tensile Strain, break, 50 mm/min | 74.8 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2190 | MPa | ISO 527 |
| Flexural Stress, yield, 2 mm/min | 73 | MPa | ISO 178 |
| Flexural Modulus, 2 mm/min | 2050 | MPa | ISO 178 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.35 | - | ASTM D792 |
| Mold Shrinkage, flow, 3.2 mm | 1.1 - 1.4 | % | SABIC method |
| Melt Flow Rate, 250°C/5.0 kgf | 9.3 | g/10 min | ASTM D1238 |
| Density | 1.34 | g/cm³ | ISO 1183 |
| Water Absorption, (23°C/saturated) | 0.08 | % | ISO 62-1 |
| Moisture Absorption (23°C / 50% RH) | 0.08 | % | ISO 62 |
| Melt Volume Rate, MVR at 250°C/5.0 kg | 7 | cm³/10 min | ISO 1133 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 1.82 MPa, 6.4 mm, unannealed | 95 | °C | ASTM D648 |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 127 | °C | ASTM D648 |
| CTE, -40°C to 40°C, flow | 8.16E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 9.74E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, flow | 8.16E-05 | 1/°C | ISO 11359-2 |
| CTE, -40°C to 40°C, xflow | 9.74E-05 | 1/°C | ISO 11359-2 |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 122 | °C | ISO 75/Bf |
| Relative Temp Index, Elec | 120 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 120 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 140 | °C | UL 746B |
Your PDF is downloading. Please wait.
