ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Dielectric Constant, 5 GHz | 2.84 | - | SABIC method |
Dissipation Factor, 5 GHz | 0.0059 | - | SABIC method |
LNP ELCRIN ENH2900RCC compound is based on Polycarbonate / Polybutylene Terephthalate (PC/PBT) blend, with 40% post-consumer recycle (PCR) Polycarbonate content. Added features of this grade include: Non-Chlorinated, Non-Brominated Flame Retardant, Good Flow, Impact Modified and Improved Chemical Resistance.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Dielectric Constant, 5 GHz | 2.84 | - | SABIC method |
Dissipation Factor, 5 GHz | 0.0059 | - | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
UL Recognized, 94V-1 Flame Class Rating | 1.1 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 0°C | 700 | J/m | ASTM D256 |
Izod Impact, notched, 23°C | 845 | J/m | ASTM D256 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 - 90 | °C | |
Drying Time | 3 - 4 | Hrs | |
Melt Temperature | 245 - 275 | °C | |
Nozzle Temperature | 240 - 275 | °C | |
Front - Zone 3 Temperature | 245 - 275 | °C | |
Middle - Zone 2 Temperature | 220 - 265 | °C | |
Rear - Zone 1 Temperature | 230 - 250 | °C | |
Mold Temperature | 60 - 80 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 40 - 100 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 50 mm/min | 59 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 50 mm/min | 50 | MPa | ASTM D638 |
Tensile Strain, brk, Type I, 50 mm/min | 94 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 2250 | MPa | ASTM D638 |
Flexural Strength, 1.3 mm/min, 50 mm span | 89 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2350 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.2 | - | ASTM D792 |
Melt Flow Rate, 250°C/5.0 kgf | 19 | g/10 min | ASTM D1238 |
Melt Flow Rate, 265°C/5.0 kgf | 27 | g/10 min | ASTM D1238 |
Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.8 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 100 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 85 | °C | ASTM D648 |
Relative Temp Index, Elec | 75 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 75 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 75 | °C | UL 746B |
Your PDF is downloading. Please wait.