LNP™ ELCRIN™ EXL1414AG

Sustainable Grade

LNP ELCRIN EXL1414AG is based on Polycarbonate (PC) siloxane copolymer and is a medium flow opaque injection molding (IM) grade that incorporates renewable feedstock through ISCC+ mass-balance certification. This resin offers extreme low temperature (-40°C) ductility in combination with excellent processability and mold release, providing opportunities for shorter IM cycle times compared with standard PC. ELCRIN EXL1414AG resin is available in a wide range of opaque colors and is targeted for a variety of applications.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Impact resistant
Low temperature impact
No PFAS intentionally added
Sustainable (bio-based offerings)

Industry

Material previously used in

Automotive Exteriors
Automotive Interiors
Automotive Under the Hood
Building Component
Commercial Appliance
Defense
Electrical
General Healthcare
Home Appliances
Lighting
Mobile Phone - Computer - Tablets
Ophthalmics
Patient Testing
Personal Accessory
Personal Recreation
Recreational/Specialty Vehicles
Sport/Leisure
Surgical devices
Water Management

Applications

Possible usage of material

Air Conditioning
Audio
Auto Aftermarket
Body Protection
Circuit Protection
Cooking Range
Data Management
Data Transfer
Displays
Document Handling
Electronic Components
Electronics
Enclosure/Housing/Cover
Enclosures
EV Infrastructure
Eyeglasses
Fuel Handling
Furnace/Heater
Head Protection
Heavy Vehicles

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	-	-	-
UL Recognized, 94HB Flame Class Rating	-	mm	UL 94

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	-	J/m	ASTM D256
Izod Impact, notched, -30°C	-	J/m	ASTM D256
Instrumented Dart Impact Total Energy, 23°C	-	J	ASTM D3763

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	-	°C
Drying Time	-	Hrs
Drying Time (Cumulative)	-	Hrs
Maximum Moisture Content	-	%
Melt Temperature	-	°C
Nozzle Temperature	-	°C
Front - Zone 3 Temperature	-	°C
Middle - Zone 2 Temperature	-	°C
Rear - Zone 1 Temperature	-	°C
Mold Temperature	-	°C
Back Pressure	-	MPa
Screw Speed	-	rpm
Shot to Cylinder Size	-	%
Vent Depth	-	mm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yld, Type I, 50 mm/min	-	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min	-	MPa	ASTM D638
Tensile Strain, yld, Type I, 50 mm/min	-	%	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min	-	%	ASTM D638
Tensile Modulus, 50 mm/min	-	MPa	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	-	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	-	MPa	ASTM D790
Hardness, Rockwell L	-	-	ASTM D785
Hardness, Rockwell R	-	-	ASTM D785

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	-	-	ASTM D792
Mold Shrinkage, flow, 3.2 mm	-	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	-	%	SABIC method
Water Absorption, (23°C/saturated)	-	%	ISO 62-1
Melt Volume Rate, MVR at 300°C/1.2 kg	-	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Vicat Softening Temp, Rate B/50	-	°C	ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed	-	°C	ASTM D648
CTE, -40°C to 40°C, flow	-	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	-	1/°C	ASTM E831
CTE, 23°C to 80°C, flow	-	1/°C	ISO 11359-2
CTE, 23°C to 80°C, xflow	-	1/°C	ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C	-	-	IEC 60695-10-2
Vicat Softening Temp, Rate B/50	-	°C	ISO 306
Vicat Softening Temp, Rate B/120	-	°C	ISO 306
*HDT/Be, 0.45MPa Edgew 120104 sp=100mm*	-	°C	ISO 75/Be
*HDT/Ae, 1.8 MPa Edgew 120104 sp=100mm*	-	°C	ISO 75/Ae
Relative Temp Index, Elec	-	°C	UL 746B
Relative Temp Index, Mech w/impact	-	°C	UL 746B
Relative Temp Index, Mech w/o impact	-	°C	UL 746B

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	View	-	-
UL Recognized, 94HB Flame Class Rating	0.4	mm	UL 94

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	777	J/m	ASTM D256
Izod Impact, notched, -30°C	627	J/m	ASTM D256
Instrumented Dart Impact Total Energy, 23°C	68	J	ASTM D3763

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	120	°C
Drying Time	3 - 4	Hrs
Drying Time (Cumulative)	48	Hrs
Maximum Moisture Content	0.02	%
Melt Temperature	295 - 315	°C
Nozzle Temperature	290 - 310	°C
Front - Zone 3 Temperature	295 - 315	°C
Middle - Zone 2 Temperature	280 - 305	°C
Rear - Zone 1 Temperature	270 - 295	°C
Mold Temperature	70 - 95	°C
Back Pressure	0.3 - 0.7	MPa
Screw Speed	40 - 70	rpm
Shot to Cylinder Size	40 - 60	%
Vent Depth	0.025 - 0.076	mm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yld, Type I, 50 mm/min	54	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min	55	MPa	ASTM D638
Tensile Strain, yld, Type I, 50 mm/min	6	%	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min	91.5	%	ASTM D638
Tensile Modulus, 50 mm/min	2150	MPa	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	92	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	2230	MPa	ASTM D790
Hardness, Rockwell L	89	-	ASTM D785
Hardness, Rockwell R	121	-	ASTM D785

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.18	-	ASTM D792
Mold Shrinkage, flow, 3.2 mm	0.4 - 0.8	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	0.4 - 0.8	%	SABIC method
Water Absorption, (23°C/saturated)	0.35	%	ISO 62-1
Melt Volume Rate, MVR at 300°C/1.2 kg	10	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Vicat Softening Temp, Rate B/50	145	°C	ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed	124	°C	ASTM D648
CTE, -40°C to 40°C, flow	6.97E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	7.47E-05	1/°C	ASTM E831
CTE, 23°C to 80°C, flow	7.2E-05	1/°C	ISO 11359-2
CTE, 23°C to 80°C, xflow	7.2E-05	1/°C	ISO 11359-2
Ball Pressure Test, 125°C +/- 2°C	Passes	-	IEC 60695-10-2
Vicat Softening Temp, Rate B/50	145	°C	ISO 306
Vicat Softening Temp, Rate B/120	146	°C	ISO 306
*HDT/Be, 0.45MPa Edgew 120104 sp=100mm*	140	°C	ISO 75/Be
*HDT/Ae, 1.8 MPa Edgew 120104 sp=100mm*	128	°C	ISO 75/Ae
Relative Temp Index, Elec	80	°C	UL 746B
Relative Temp Index, Mech w/impact	80	°C	UL 746B
Relative Temp Index, Mech w/o impact	80	°C	UL 746B

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES

LNP™ ELCRIN™ EXL1414AG

Product Family

Polymer Family

Processing Technology

Where to buy

Colors

Features

Industry

Applications

Technical Datasheet Data

FLAME CHARACTERISTICS

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

FLAME CHARACTERISTICS

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

Related Documents

Register for High value Multi-Point Data