ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | ≥1E+15 | Ω | ASTM D257 |
Volume Resistivity | >1E+15 | Ω.cm | ASTM D257 |
LNP ELCRIN EXL1613TB polycarbonate (PC) siloxane copolymer resin is a transparent injection molding grade with component synthesized from Bio source. This resin offers extreme low temperature ductility in combination with medium flow characteristics and excellent processability with opportunities for shorter IM cycle times compared to standard PC. ELCRIN EXL1613TB resin is a general purpose product available in transparent and opaque colors and is an excellent candidate for a broad range of applications.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | ≥1E+15 | Ω | ASTM D257 |
Volume Resistivity | >1E+15 | Ω.cm | ASTM D257 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 900 | J/m | ASTM D256 |
Izod Impact, notched, -30°C | 690 | J/m | ASTM D256 |
Izod Impact, notched 80*10*3 +23°C | 62 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*3 -30°C | 20 | kJ/m² | ISO 180/1A |
Izod Impact, unnotched 80*10*3 +23°C | 130 | kJ/m² | ISO 180/1U |
Izod Impact, unnotched 80*10*3 -30°C | 130 | kJ/m² | ISO 180/1U |
Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 70 | kJ/m² | ISO 179/1eA |
Charpy -30°C, V-notch Edgew 80*10*3 sp=62mm | 20 | kJ/m² | ISO 179/1eA |
Charpy 23°C, Unnotch Edgew 80*10*3 sp=62mm | 95 | kJ/m² | ISO 179/1eU |
Charpy -30°C, Unnotch Edgew 80*10*3 sp=62mm | 95 | kJ/m² | ISO 179/1eU |
Instrumented Dart Impact Total Energy, 23°C | 75 | J | ASTM D3763 |
Instrumented Dart Impact Total Energy, -30°C | 73 | J | ASTM D3763 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 3 - 4 | Hrs | |
Drying Time (Cumulative) | 48 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 300 - 330 | °C | |
Nozzle Temperature | 300 - 320 | °C | |
Front - Zone 3 Temperature | 305 - 330 | °C | |
Middle - Zone 2 Temperature | 295 - 315 | °C | |
Rear - Zone 1 Temperature | 285 - 305 | °C | |
Mold Temperature | 80 - 115 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 40 - 70 | rpm | |
Shot to Cylinder Size | 40 - 60 | % | |
Vent Depth | 0.025 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 50 mm/min | 57 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 50 mm/min | 49 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 50 mm/min | 5.9 | % | ASTM D638 |
Tensile Strain, brk, Type I, 50 mm/min | 58 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 2100 | MPa | ASTM D638 |
Flexural Strength, 1.3 mm/min, 50 mm span | 90 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2012 | MPa | ASTM D790 |
Tensile Stress, yield, 50 mm/min | 57 | MPa | ISO 527 |
Tensile Stress, break, 50 mm/min | 47 | MPa | ISO 527 |
Tensile Strain, yield, 50 mm/min | 5.7 | % | ISO 527 |
Tensile Strain, break, 50 mm/min | 67 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2100 | MPa | ISO 527 |
Flexural Strength, 2 mm/min | 85 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 2100 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Light Transmission, 2.54 mm | 87 | % | ASTM D1003 |
Haze, 2.54 mm | 1.3 | % | ASTM D1003 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.18 | - | ASTM D792 |
Density | 1.18 | g/cm³ | ISO 1183 |
Melt Flow Rate, 300°C/1.2 kgf | 8 | g/10 min | ASTM D1238 |
Melt Volume Rate, MVR at 300°C/1.2 kg | 7.5 | cm³/10 min | ISO 1133 |
Moisture Absorption (23°C / 50% RH) | 0.04 | % | ISO 62 |
Mold Shrinkage, flow, 3.2 mm | 0.4 - 0.8 | % | SABIC method |
Mold Shrinkage, xflow, 3.2 mm | 0.4 - 0.8 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 3.2mm, unannealed | 122 | °C | ASTM D648 |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 122 | °C | ISO 75/Af |
CTE, -40°C to 95°C, flow | 7.15E-05 | 1/°C | ASTM E831 |
CTE, -40°C to 95°C, xflow | 7.61E-05 | 1/°C | ASTM E831 |
CTE, 23°C to 80°C, flow | 7.7E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 80°C, xflow | 8.26E-05 | 1/°C | ISO 11359-2 |
Vicat Softening Temp, Rate A/50 | 150 | °C | ASTM D1525 |
Vicat Softening Temp, Rate B/50 | 142 | °C | ISO 306 |
Vicat Softening Temp, Rate B/120 | 143 | °C | ISO 306 |
Ball Pressure Test, 125°C +/- 2°C | PASS | - | IEC 60695-10-2 |
Your PDF is downloading. Please wait.