LNP™ ELCRIN™ EXL7164RCCK

Sustainable Grade

LNP ELCRIN EXL7164RCCK polycarbonate (PC) siloxane copolymer resin is a UV stabilized, high flow, non-chlorinated, non-brominated flame retardant opaque grade with 65% post consumer recycle (PCR) content. This resin offers excellent low temperature ductility (-30 ~ -40 °C), UL94 V0 at 0.75mm, good chemical resistance and in combination with excellent processability and mold release with opportunities for shorter cycle times compared to standard PC. ELCRIN EXL7164RCCK resin is a product available in wide range of opaque colors and excellent candidate for a wide variety of thin wall applications.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Chemical Resistance
Good Processability
Low temperature impact
No PFAS intentionally added
Non Cl/Br flame retardant
Sustainable (Mechanical Recycling)

Industry

Material previously used in

Electronic Components
Home Appliances
Mobile Phone - Computer - Tablets
Personal Accessory

Applications

Possible usage of material

Automotive
Mobile Phone
Electronic Components
Electronics

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	>1E+16	Ω	ASTM D257
Volume Resistivity	>1E+16	Ω.cm	ASTM D257
Dielectric Constant
– 1.1 GHz	2.96	-	SABIC method
– 1.9 GHz	2.92	-	SABIC method
– 5 GHz	2.93	-	SABIC method
– 10 GHz	2.94	-	SABIC method
Dissipation Factor
– 1.1 GHz	0.007	-	SABIC method
– 1.9 GHz	0.007	-	SABIC method
– 5 GHz	0.0069	-	SABIC method
– 10 GHz	0.0073	-	SABIC method

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	View	-	-
UL Recognized, 94V-0 Flame Class Rating	≥0.75	mm	UL 94
Glow Wire Flammability Index 960°C, passes at	1	mm	IEC 60695-2-12
Glow Wire Ignitability Temperature, 1.0 mm	875	°C	IEC 60695-2-13

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	750	J/m	ASTM D256
Izod Impact, notched, -30°C	480	J/m	ASTM D256
Izod Impact, notched, -40°C	410	J/m	ASTM D256
*Izod Impact, notched 80103 +23°C*	57	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 -30°C*	37	kJ/m²	ISO 180/1A
*Charpy 23°C, V-notch Edgew 80103 sp=62mm*	60	kJ/m²	ISO 179/1eA
*Charpy -30°C, V-notch Edgew 80103 sp=62mm*	40	kJ/m²	ISO 179/1eA
Instrumented Dart Impact Total Energy, 23°C	60	J	ASTM D3763
Instrumented Dart Impact Total Energy, -30°C	57	J	ASTM D3763

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	90 - 100	°C
Drying Time	3 - 4	Hrs
Maximum Moisture Content	0.02	%
Melt Temperature	285 - 315	°C
Nozzle Temperature	280 - 310	°C
Front - Zone 3 Temperature	285 - 315	°C
Middle - Zone 2 Temperature	270 - 305	°C
Rear - Zone 1 Temperature	265 - 295	°C
Mold Temperature	70 - 90	°C
Back Pressure	0.3 - 0.7	MPa
Screw Speed	40 - 70	rpm
Shot to Cylinder Size	40 - 60	%
Vent Depth	0.025 - 0.076	mm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yld, Type I, 50 mm/min	55	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min	49	MPa	ASTM D638
Tensile Strain, yld, Type I, 50 mm/min	4.6	%	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min	85	%	ASTM D638
Tensile Modulus, 50 mm/min	2420	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	86	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	2250	MPa	ASTM D790
Tensile Stress, yield, 50 mm/min	55	MPa	ISO 527
Tensile Stress, break, 50 mm/min	47	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	4.5	%	ISO 527
Tensile Strain, break, 50 mm/min	90	%	ISO 527
Tensile Modulus, 1 mm/min	2430	MPa	ISO 527
Flexural Strength, 2 mm/min	83	MPa	ISO 178
Flexural Modulus, 2 mm/min	2210	MPa	ISO 178
Hardness, Rockwell L	84	-	ASTM D785
Hardness, Rockwell R	116	-	ASTM D785

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.20	-	ASTM D792
Density	1.20	g/cm³	ISO 1183
Melt Flow Rate
– 300°C/1.2 kgf	25	g/10 min	ASTM D1238
Melt Volume Rate
– 300°C/1.2 kg	23	cm³/10 min	ISO 1133
Mold Shrinkage, flow, 3.2 mm	0.5 - 0.9	%	SABIC method
Mold Shrinkage, xflow, 3.2 mm	0.5 - 0.9	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	103	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	92	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	103	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	94	°C	ISO 75/Af
CTE, -40°C to 40°C, flow	9.2E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	7.7E-05	1/°C	ASTM E831
CTE, 23°C to 80°C, flow	9.1E-05	1/°C	ISO 11359-2
CTE, 23°C to 80°C, xflow	9.9E-05	1/°C	ISO 11359-2
Vicat Softening Temp, Rate B/50	107	°C	ISO 306
Vicat Softening Temp, Rate B/120	109	°C	ISO 306
Relative Temp Index, Elec	80	°C	UL 746B
Relative Temp Index, Mech w/impact	80	°C	UL 746B
Relative Temp Index, Mech w/o impact	80	°C	UL 746B

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES