FLAME CHARACTERISTICS
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥0.6 | mm | UL 94 |
LNP ELCRIN RCM6247 is an injection moldable filled PC/ABS with non-brominated and non-chlorinated flame retardant. It contains 65% post consumer recycle content with a UL94 V0 rating 0.6mm. Developed for thin Wall applications that require high flow and high stiffness performance.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥0.6 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 400 | J/m | ASTM D256 |
Izod Impact, notched 80*10*3 +23°C | 26 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 +23°C | 20 | kJ/m² | ISO 180/1A |
Charpy 23°C, V-notch Edgew 80*10*4 sp=62mm | 20 | kJ/m² | ISO 179/1eA |
Instrumented Dart Impact Total Energy, 23°C | 56 | J | ASTM D3763 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 - 90 | °C | |
Drying Time | 3 - 4 | Hrs | |
Drying Time (Cumulative) | 8 | Hrs | |
Maximum Moisture Content | 0.04 | % | |
Melt Temperature | 245 - 285 | °C | |
Nozzle Temperature | 245 - 285 | °C | |
Front - Zone 3 Temperature | 245 - 285 | °C | |
Middle - Zone 2 Temperature | 220 - 275 | °C | |
Rear - Zone 1 Temperature | 220 - 265 | °C | |
Mold Temperature | 60 - 90 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 40 - 70 | rpm | |
Shot to Cylinder Size | 30 - 80 | % | |
Vent Depth | 0.038 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 5 mm/min | 56 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 5 mm/min | 40 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 5 mm/min | 3.1 | % | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | >45 | % | ASTM D638 |
Tensile Modulus, 5 mm/min | 3200 | MPa | ASTM D638 |
Flexural Strength, 1.3 mm/min, 50 mm span | 94 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 3050 | MPa | ASTM D790 |
Tensile Stress, yield, 5 mm/min | 57 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 42 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 3.1 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | >45 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 3200 | MPa | ISO 527 |
Flexural Strength, 2 mm/min | 94 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 3100 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.22 | - | ASTM D792 |
Melt Flow Rate, 260°C/2.16 kgf | 15.5 | g/10 min | ASTM D1238 |
Mold Shrinkage, flow, 3.2 mm | 0.5 - 0.7 | % | SABIC method |
Mold Shrinkage, xflow, 3.2 mm | 0.5 - 0.7 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
CTE, 23°C to 80°C, flow | 6.5E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 80°C, xflow | 8.5E-05 | 1/°C | ISO 11359-2 |
HDT, 0.45 MPa, 3.2 mm, unannealed | 97 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 89 | °C | ASTM D648 |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 89 | °C | ISO 75/Af |
Relative Temp Index, Elec | 60 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 60 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 60 | °C | UL 746B |
Your PDF is downloading. Please wait.