FLAME CHARACTERISTICS
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥0.75 | mm | UL 94 |
LNP ELCRIN RCX7246 is an impact modified Polycarbonate (PC) containing 65% PCR content with non-brominated and non-chlorinated FR intended for thin-wall applications requiring excellent impact/flow balance performance.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥0.75 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 690 | J/m | ASTM D256 |
Izod Impact, notched, 0°C | 129 | J/m | ASTM D256 |
Izod Impact, notched 80*10*4 +23°C | 39 | kJ/m² | ISO 180/1A |
Instrumented Dart Impact Total Energy, 23°C | 61 | J | ASTM D3763 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 - 90 | °C | |
Drying Time | 3 - 4 | Hrs | |
Melt Temperature | 250 - 300 | °C | |
Nozzle Temperature | 250 - 300 | °C | |
Front - Zone 3 Temperature | 250 - 300 | °C | |
Middle - Zone 2 Temperature | 240 - 265 | °C | |
Rear - Zone 1 Temperature | 230 - 290 | °C | |
Mold Temperature | 60 - 85 | °C |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 50 mm/min | 62 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 50 mm/min | 53 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 50 mm/min | 4 | % | ASTM D638 |
Tensile Strain, brk, Type I, 50 mm/min | 105 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 2600 | MPa | ASTM D638 |
Flexural Strength, 1.3 mm/min, 50 mm span | 102 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2500 | MPa | ASTM D790 |
Tensile Stress, yield, 50 mm/min | 66 | MPa | ISO 527 |
Tensile Stress, break, 50 mm/min | 53 | MPa | ISO 527 |
Tensile Strain, yield, 50 mm/min | 4 | % | ISO 527 |
Tensile Strain, break, 50 mm/min | 77 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2570 | MPa | ISO 527 |
Flexural Strength, 2 mm/min | 98 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 2520 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.20 | - | ASTM D792 |
Melt Flow Rate, 260°C/2.16 kgf | 15 | g/10 min | ASTM D1238 |
Melt Flow Rate, 280°C/2.16 kgf | 29 | g/10 min | ASTM D1238 |
Mold Shrinkage, flow, 3.2 mm | 0.2 - 0.5 | % | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 3.2mm, unannealed | 94 | °C | ASTM D648 |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 93 | °C | ISO 75/Af |
CTE, -40°C to 40°C, flow | 7.0E-05 | 1/°C | ASTM E831 |
CTE, -40°C to 40°C, xflow | 7.0E-05 | 1/°C | ASTM E831 |
Vicat Softening Temp, Rate B/50 | 118 | °C | ASTM D1525 |
Relative Temp Index, Elec | 80 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 80 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 80 | °C | UL 746B |
Your PDF is downloading. Please wait.