LNP™ FARADEX™ Compound 9X23246

LNP FARADEX 9X23246 compound is based on Polycarbonate/Acrylonitrile Styrene Acrylate (PC/ASA) blend containing a stainless steel fiber. Added features of this grade include: Electrically Conductive, EMI/RFI shielding

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate + ASA (PC+ASA)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Electrically Conductive
EMI/RFI Shielding
No PFAS intentionally added

Industry

Material previously used in

Automotive Interiors

Applications

Possible usage of material

Electrical Components & Infrastructure
Enclosure/Housing/Cover
Interior

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1.0E+01 - 1.0E+03	Ω	ASTM D257
Volume Resistivity	1.0E+02 - 1.0E+04	Ω.cm	ASTM D4496
Shielding Effectivness @ 3mm	50 - 65	dB	SABIC method
Static Decay, 5000V to <50V	<0.01	Seconds	FTMS101B

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	15	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	8	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	70	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80104 -30°C*	65	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	13	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	60	kJ/m²	ISO 179/1eU
Izod Impact, notched, 23°C	130	J/m	ASTM D256
Izod Impact, notched, -30°C	85	J/m	ASTM D256
Izod Impact, unnotched, 23°C	850	J/m	ASTM D4812
Izod Impact, unnotched, -30°C	850	J/m	ASTM D4812

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	100 - 110	°C
Drying Time	2 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Maximum Moisture Content	0.02	%
Melt Temperature	260 - 290	°C
Rear - Zone 1 Temperature	240 - 270	°C
Middle - Zone 2 Temperature	250 - 280	°C
Front - Zone 3 Temperature	260 - 290	°C
Nozzle Temperature	260 - 290	°C
Mold Temperature	60 - 90	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	2500	MPa	ISO 527
Tensile Strain, break, 5 mm/min	45	%	ISO 527
Tensile Nominal Strain, break, 5 mm/min	5	%	ISO 527
Tensile Stress, yield, 5 mm/min	53	MPa	ISO 527
Flexural Modulus, 2 mm/min	2500	MPa	ISO 178
Flexural Strength, 2 mm/min	85	MPa	ISO 178
Tensile Modulus, 5 mm/min	2700	MPa	ASTM D638
Tensile Stress, yld, Type I, 5 mm/min	53	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	6	%	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	2700	MPa	ASTM D790
Flexural Stress, yld, 1.3 mm/min, 50 mm span	90	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.23	g/cm³	ISO 1183
Specific Gravity	1.23	-	ASTM D792
Mold Shrinkage, flow	0.1 - 0.3	%	SABIC method
Mold Shrinkage, xflow	0.1 - 0.4	%	SABIC method
Moisture Absorption (23°C / 50% RH)	0.1	%	ISO 62
Water Absorption, (23°C/ saturated)	0.4	%	ASTM D570

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	112	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	127	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/50	132	°C	ISO 306
Vicat Softening Temp, Rate B/120	134	°C	ISO 306
CTE, 23°C to 50°C, flow	5.0E-05	1/°C	ISO 11359-2
CTE, 23°C to 50°C, xflow	6.0E-05	1/°C	ISO 11359-2
HDT, 1.82 MPa, 3.2mm, unannealed	112	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	127	°C	ASTM D648

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES