ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+02 - 1.E+03 | Ω | ASTM D257 |
Shielding Effectivness @ 3mm | 45 - 55 | dB | SABIC method |
LNP FARADEX WX08014 compound is based on Polybutylene Terephthalate (PBT) resin containing stainless steel fiber. Added features of this grade include: EMI/RFI shielding, Electrically Conductive, Flame Retardant.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+02 - 1.E+03 | Ω | ASTM D257 |
Shielding Effectivness @ 3mm | 45 - 55 | dB | SABIC method |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Compliant, 94V-0 Flame Class Rating | 3 | mm | UL 94 by SABIC-IP |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched 80*10*4 +23°C | 15 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 3 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.05 | % | |
Melt Temperature | 245 - 260 | °C | |
Front - Zone 3 Temperature | 250 - 260 | °C | |
Middle - Zone 2 Temperature | 245 - 255 | °C | |
Rear - Zone 1 Temperature | 230 - 245 | °C | |
Mold Temperature | 80 - 100 | °C | |
Back Pressure | 0.2 - 0.3 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield, 5 mm/min | 44 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 43 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 2 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 2.5 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 3200 | MPa | ISO 527 |
Flexural Stress, yield, 2 mm/min | 79 | MPa | ISO 178 |
Flexural Stress, break, 2 mm/min | 78 | MPa | ISO 178 |
Flexural Strain, break, 2 mm/min | 3.7 | % | ISO 178 |
Flexural Modulus, 2 mm/min | 3400 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Mold Shrinkage, flow, 24 hrs | 1.9 | % | ISO 294 |
Mold Shrinkage, xflow, 24 hrs | 2.2 | % | ISO 294 |
Density | 1.64 | g/cm³ | ISO 1183 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
CTE, 23°C to 60°C, flow | 9.7E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 60°C, xflow | 1.11E-04 | 1/°C | ISO 11359-2 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 150 | °C | ISO 75/Bf |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 76 | °C | ISO 75/Af |
Your PDF is downloading. Please wait.