LNP™ KONDUIT™ Compound OX24315

LNP KONDUIT OX24315 compound is a thermally conductive PPS compound. Typical features include thermal conductivity, insulation, high heat resistance and good dimensional stability.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polyphenylene Sulfide, Linear (PPS, Linear)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

No PFAS intentionally added
Thermally conductive/Electrically isolative

Industry

Material previously used in

Energy Management

Applications

Possible usage of material

EV/HEV Charging System

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1E+16	Ω	ASTM D257
Volume Resistivity	1E+16	Ω.cm	ASTM D257

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	15	J/m	ASTM D256
Izod Impact, unnotched, 23°C	68	J/m	ASTM D4812
*Izod Impact, notched 80104 +23°C*	2.7	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	5.8	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	1.2	kJ/m²	ISO 179/1eA
*Charpy -30°C, V-notch Edgew 80104 sp=62mm*	1.2	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	4.7	kJ/m²	ISO 179/1eU
*Charpy -30°C, Unnotch Edgew 80104 sp=62mm*	4.2	kJ/m²	ISO 179/1eU
Instrumented Dart Impact Total Energy, 23°C	4.5	J	ASTM D3763
Instrumented Dart Impact Energy @ peak, 23°C	2.7	J	ASTM D3763
Multiaxial Impact	3.7	J	ISO 6603

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	120 - 140	°C
Drying Time	3 - 4	Hrs
Melt Temperature	300 - 340	°C
Nozzle Temperature	310 - 340	°C
Front - Zone 3 Temperature	310 - 330	°C
Middle - Zone 2 Temperature	310 - 330	°C
Rear - Zone 1 Temperature	310 - 330	°C
Mold Temperature	140 - 160	°C
Screw Speed	60 - 100	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 5 mm/min	57	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	0.5	%	ASTM D638
Tensile Modulus, 5 mm/min	14500	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	83	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	16000	MPa	ASTM D790
Tensile Stress, break, 5 mm/min	57	MPa	ISO 527
Tensile Strain, break, 5 mm/min	0.6	%	ISO 527
Tensile Modulus, 1 mm/min	15200	MPa	ISO 527
Flexural Strength, 2 mm/min	82	MPa	ISO 178
Flexural Modulus, 2 mm/min	17000	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.72	-	ASTM D792
Density	1.72	g/cm³	ASTM D792
Water Absorption, (23°C/24hrs)	0.01	%	ISO 62-1
Mold Shrinkage, flow	0.4 - 0.5	%	SABIC method
Mold Shrinkage, xflow	0.5 - 0.6	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	272	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	224	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	275	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	228	°C	ISO 75/Af
Vicat Softening Temp, Rate B/50	246	°C	ISO 306
Vicat Softening Temp, Rate B/120	243	°C	ISO 306
*Thermal Conductivity through-plane, 10103mm sample*	2	W/m-K	ASTM E1461-07
*Thermal Conductivity in-plane, 250.4mm disc**	8	W/m-K	ASTM E1461-07

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES