FLAME CHARACTERISTICS
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94HB Flame Class Rating | 1.5 | mm | UL 94 |
LNP LUBRICOMP AL001 compound is based on Acrylonitrile Butadiene Styrene (ABS) resin containing 5% PTFE. Added features of this grade include: Wear Resistant.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94HB Flame Class Rating | 1.5 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 587 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 101 | J/m | ASTM D256 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.05 - 0.1 | % | |
Melt Temperature | 260 | °C | |
Front - Zone 3 Temperature | 265 - 275 | °C | |
Middle - Zone 2 Temperature | 230 - 245 | °C | |
Rear - Zone 1 Temperature | 205 - 215 | °C | |
Mold Temperature | 70 - 80 | °C | |
Back Pressure | 0.2 - 0.3 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, break | 39 | MPa | ASTM D638 |
Tensile Strain, break | 15 | % | ASTM D638 |
Flexural Stress | 69 | MPa | ASTM D790 |
Flexural Modulus | 2460 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.09 | g/cm³ | ASTM D792 |
Mold Shrinkage, flow, 24 hrs | 0.7 | % | ASTM D955 |
Mold Shrinkage, xflow, 24 hrs | 0.7 | % | ASTM D955 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 3.2mm, unannealed | 80 | °C | ASTM D648 |
Relative Temp Index, Elec | 60 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 60 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 60 | °C | UL 746B |
Your PDF is downloading. Please wait.