LNP™ LUBRICOMP™ Compound CG002XXN

LNP LUBRICOMP CG002XXN compound is based on Polystyrene (PS) resin containing graphite. Added features of this grade include: Wear Resistant.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polystyrene (PS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

No PFAS intentionally added
Wear resistant

Industry

Material previously used in

Building Component
Water Management

Applications

Possible usage of material

Meter Water

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	2	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	8	kJ/m²	ISO 180/1U
Izod Impact, notched, 23°C	13	J/m	ASTM D256
Izod Impact, unnotched, 23°C	111	J/m	ASTM D4812
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	1	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	9	kJ/m²	ISO 179/1eU

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80	°C
Drying Time	4 - 6	Hrs
Drying Time (Cumulative)	48	Hrs
Maximum Moisture Content	0.02	%
Hopper Temperature	40 - 60	°C
Melt Temperature	240 - 270	°C
Rear - Zone 1 Temperature	220 - 230	°C
Middle - Zone 2 Temperature	230 - 250	°C
Front - Zone 3 Temperature	240 - 270	°C
Nozzle Temperature	235 - 265	°C
Mold Temperature	40 - 60	°C
Back Pressure	0.2 - 0.3	MPa

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, break, 5 mm/min	45	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2	%	ISO 527
Tensile Modulus, 1 mm/min	4100	MPa	ISO 527
Flexural Stress, break, 2 mm/min	72	MPa	ISO 178
Flexural Modulus, 2 mm/min	4000	MPa	ISO 178
Tensile Stress, brk, Type I, 5 mm/min	47	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	2	%	ASTM D638
Tensile Modulus, 5 mm/min	4200	MPa	ASTM D638
Flexural Stress, brk, 1.3 mm/min, 50 mm span	74	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	4000	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Moisture Absorption (23°C / 50% RH)	0.03 - 0.05	%	ISO 62
Water Absorption, (23°C/saturated)	0.03 - 0.05	%	ISO 62-1
Moisture Absorption, (23°C/50% RH/24 hrs)	0.04	%	ASTM D570
Water Absorption, (23°C/24hrs)	0.05	%	ASTM D570
Mold Shrinkage, flow	0.4 - 0.6	%	SABIC method
Mold Shrinkage, xflow	0.4 - 0.6	%	SABIC method
Melt Volume Rate, MVR at 230°C/5.0 kg	21	cm³/10 min	ISO 1133
Melt Flow Rate, 230°C/5 kgf	20	g/10 min	ASTM D1238
Density	1.10	g/cm³	ISO 1183
Specific Gravity	1.10	-	ASTM D792

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Vicat Softening Temp, Rate B/50	99	°C	ISO 306
Vicat Softening Temp, Rate B/120	100	°C	ISO 306
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	95	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	85	°C	ISO 75/Af
Vicat Softening Temp, Rate B/50	99	°C	ASTM D1525
HDT, 0.45 MPa, 3.2 mm, unannealed	95	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	85	°C	ASTM D648
CTE, 23°C to 60°C, flow	6.76E-05	1/°C	ISO 11359-2
CTE, 23°C to 60°C, xflow	7.80E-05	1/°C	ISO 11359-2
CTE, 23°C to 60°C, flow	6.76E-05	1/°C	ASTM E831
CTE, 23°C to 60°C, xflow	7.80E-05	1/°C	ASTM E831

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES