LNP™ LUBRICOMP™ Compound CZL36

LNP LUBRICOMP CZL36 compound is based on Polystyrene (PS) resin containing 30% milled glass and 15% PTFE. Added features of this grade include: Wear Resistant.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polystyrene (PS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Wear resistant

Industry

Material previously used in

Automotive Interiors
Building Component
Material Handling
Mobile Phone - Computer - Tablets
Sport/Leisure
Water Management

Applications

Possible usage of material

Meter Water

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, unnotched, 23°C	117	J/m	ASTM D4812
Izod Impact, notched, 23°C	26	J/m	ASTM D256
Instrumented Dart Impact Energy @ peak, 23°C	2	J	ASTM D3763
*Izod Impact, unnotched 80104 +23°C*	7	kJ/m²	ISO 180/1U
*Izod Impact, notched 80104 +23°C*	2	kJ/m²	ISO 180/1A

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80	°C
Drying Time	4	Hrs
Melt Temperature	250	°C
Front - Zone 3 Temperature	265 - 275	°C
Middle - Zone 2 Temperature	245 - 255	°C
Rear - Zone 1 Temperature	220 - 230	°C
Mold Temperature	40 - 65	°C
Back Pressure	0.2 - 0.3	MPa
Screw Speed	30 - 60	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yield	24	MPa	ASTM D638
Tensile Stress, break	24	MPa	ASTM D638
Tensile Strain, yield	1.7	%	ASTM D638
Tensile Strain, break	2.3	%	ASTM D638
Tensile Modulus, 50 mm/min	2550	MPa	ASTM D638
Flexural Stress	52	MPa	ASTM D790
Flexural Modulus	4890	MPa	ASTM D790
Tensile Stress, yield	22	MPa	ISO 527
Tensile Stress, break	21	MPa	ISO 527
Tensile Strain, yield	1.6	%	ISO 527
Tensile Strain, break	3.5	%	ISO 527
Tensile Modulus, 1 mm/min	3880	MPa	ISO 527
Flexural Stress	49	MPa	ISO 178
Flexural Modulus	5110	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.52	g/cm³	ASTM D792
Moisture Absorption, (23°C/50% RH/24 hrs)	0.03	%	ASTM D570
Mold Shrinkage, flow, 24 hrs	0.2 - 0.3	%	ASTM D955
Mold Shrinkage, xflow, 24 hrs	0.3 - 0.4	%	ASTM D955
Mold Shrinkage, flow, 24 hrs	0.24 - 0.26	%	ISO 294
Mold Shrinkage, xflow, 24 hrs	0.31 - 0.37	%	ISO 294
Density	1.52	g/cm³	ISO 1183
Moisture Absorption (23°C / 50% RH)	0.09	%	ISO 62

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 1.82 MPa, 3.2mm, unannealed	83	°C	ASTM D648
CTE, -40°C to 40°C, flow	6.49E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	6.74E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	6.5E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	6.75E-05	1/°C	ISO 11359-2
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	83	°C	ISO 75/Af

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES