IMPACT
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 133 | J/m | ASTM D256 |
Izod Impact, unnotched 80*10*4 +23°C | 179 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 11 | kJ/m² | ISO 180/1A |
LNP LUBRICOMP DX07404H compound is based on Polycarbonate (PC) resin containing proprietary lubricant. Added features of this grade include: Healthcare, Wear Resistant.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 133 | J/m | ASTM D256 |
Izod Impact, unnotched 80*10*4 +23°C | 179 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 11 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 2 - 4 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 280 - 300 | °C | |
Front - Zone 3 Temperature | 280 - 300 | °C | |
Middle - Zone 2 Temperature | 270 - 290 | °C | |
Rear - Zone 1 Temperature | 260 - 280 | °C | |
Mold Temperature | 80 - 110 | °C |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 5 mm/min | 60 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 5 mm/min | 50 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 5 mm/min | 5 | % | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 54 | % | ASTM D638 |
Tensile Modulus, 5 mm/min | 2490 | MPa | ASTM D638 |
Flexural Stress, brk, 1.3 mm/min, 50 mm span | 89 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 2380 | MPa | ASTM D790 |
Tensile Stress, yield, 5 mm/min | 59 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 49 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 5 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 58 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2270 | MPa | ISO 527 |
Flexural Stress, break, 2 mm/min | 81 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 2380 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.25 | g/cm³ | ASTM D792 |
Moisture Absorption, (23°C/50% RH/24 hrs) | 0.14 | % | ASTM D570 |
Mold Shrinkage, flow | 0.4 - 0.6 | % | SABIC method |
Mold Shrinkage, xflow | 0.5 - 0.7 | % | SABIC method |
Mold Shrinkage, flow, 24 hrs | 0.5 - 0.7 | % | ASTM D955 |
Mold Shrinkage, xflow, 24 hrs | 0.5 - 0.7 | % | ASTM D955 |
Moisture Absorption (23°C / 50% RH) | 0.18 | % | ISO 62 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 135 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 124 | °C | ASTM D648 |
CTE, -30°C to 30°C, flow | 6.4E-05 | 1/°C | ASTM D696 |
CTE, -30°C to 30°C, xflow | 6.5E-05 | 1/°C | ASTM D696 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 135 | °C | ISO 75/Bf |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 125 | °C | ISO 75/Af |
Your PDF is downloading. Please wait.