LNP LUBRICOMP FX04491H compound is based on Polyethylene (PE) resin containing proprietary lubricant. Added features of this grade include: Wear Resistant, Healthcare
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, unnotched, 23°C | NB | J/m | ASTM D4812 |
| Izod Impact, notched, 23°C | 45 | J/m | ASTM D256 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4 | Hrs | |
| Melt Temperature | 230 | °C | |
| Front - Zone 3 Temperature | 220 - 230 | °C | |
| Middle - Zone 2 Temperature | 210 - 220 | °C | |
| Rear - Zone 1 Temperature | 195 - 205 | °C | |
| Mold Temperature | 40 - 55 | °C | |
| Back Pressure | 0.2 - 0.3 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yield | 24 | MPa | ASTM D638 |
| Tensile Strain, yield | 7.4 | % | ASTM D638 |
| Flexural Stress | 23 | MPa | ASTM D790 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Density | 0.932 | g/cm³ | ASTM D792 |
| Wear Factor Washer | 24 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF | 0.13 | - | ASTM D3702 Modified: Manual |
| Static COF | 0.11 | - | ASTM D3702 Modified: Manual |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 1.82 MPa, 3.2mm, unannealed | 42 | °C | ASTM D648 |
Your PDF is downloading. Please wait.
