FLAME CHARACTERISTICS
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
LNP LUBRICOMP LCL33E compound is based on Polyetheretherketone (PEEK) resin containing 15% carbon fiber, 15% PTFE. Added features of this grade include: Easy Molding, Wear Resistant, Electrically Conductive.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 1.5 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 491 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 64 | J/m | ASTM D256 |
Instrumented Dart Impact Energy @ peak, 23°C | 8 | J | ASTM D3763 |
Izod Impact, unnotched 80*10*4 +23°C | 34 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 6 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 150 | °C | |
Drying Time | 4 - 6 | Hrs | |
Front - Zone 3 Temperature | 380 - 400 | °C | |
Middle - Zone 2 Temperature | 380 - 400 | °C | |
Rear - Zone 1 Temperature | 370 - 380 | °C | |
Mold Temperature | 175 - 190 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 60 - 100 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, break | 179 | MPa | ASTM D638 |
Tensile Strain, break | 1.7 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 16610 | MPa | ASTM D638 |
Flexural Stress | 266 | MPa | ASTM D790 |
Flexural Modulus | 12960 | MPa | ASTM D790 |
Tensile Stress, break | 187 | MPa | ISO 527 |
Tensile Strain, break | 1.6 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 14700 | MPa | ISO 527 |
Flexural Stress | 230 | MPa | ISO 178 |
Flexural Modulus | 11700 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Melt Flow Rate, 400°C/5.0 kgf | 30 | g/10 min | ASTM D1238 |
Density | 1.43 | g/cm³ | ASTM D792 |
Moisture Absorption, (23°C/50% RH/24 hrs) | 0.07 | % | ASTM D570 |
Mold Shrinkage, flow, 24 hrs | 0.1 - 0.3 | % | ASTM D955 |
Mold Shrinkage, xflow, 24 hrs | 0.4 - 0.7 | % | ASTM D955 |
Mold Shrinkage, flow, 24 hrs | 0.1 - 0.3 | % | ISO 294 |
Mold Shrinkage, xflow, 24 hrs | 0.3 - 0.7 | % | ISO 294 |
Wear Factor Washer | 13 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
Dynamic COF | 0.35 | - | ASTM D3702 Modified: Manual |
Static COF | 0.28 | - | ASTM D3702 Modified: Manual |
Density | 1.43 | g/cm³ | ISO 1183 |
Moisture Absorption (23°C / 50% RH) | 0.7 | % | ISO 62 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 3.2mm, unannealed | >298 | °C | ASTM D648 |
CTE, -40°C to 40°C, flow | 2.37E-05 | 1/°C | ASTM E831 |
CTE, -40°C to 40°C, xflow | 4.17E-05 | 1/°C | ASTM E831 |
CTE, -40°C to 40°C, flow | 2.36E-05 | 1/°C | ISO 11359-2 |
CTE, -40°C to 40°C, xflow | 4.17E-05 | 1/°C | ISO 11359-2 |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | >240 | °C | ISO 75/Af |
Your PDF is downloading. Please wait.