LNP LUBRICOMP NXCY620 compound is based on Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend containing silicone. Added features of this grade include: Wear Resistant.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, unnotched, 23°C | NB | J/m | ASTM D4812 |
| Izod Impact, notched, 23°C | 654 | J/m | ASTM D256 |
| Izod Impact, unnotched 80*10*4 +23°C | NB | kJ/m² | ISO 180/1U |
| Izod Impact, notched 80*10*4 +23°C | 48 | kJ/m² | ISO 180/1A |
| Izod Impact, notched 80*10*4 -40°C | 28 | kJ/m² | ISO 180/1A |
| Charpy Impact, notched, 23°C | 51 | kJ/m² | ISO 179/2C |
| Charpy Impact, notched, -30°C | 39 | kJ/m² | ISO 179/2C |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 95 - 105 | °C | |
| Drying Time | 2 - 4 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 260 - 290 | °C | |
| Nozzle Temperature | 240 - 280 | °C | |
| Front - Zone 3 Temperature | 250 - 290 | °C | |
| Middle - Zone 2 Temperature | 250 - 290 | °C | |
| Rear - Zone 1 Temperature | 230 - 260 | °C | |
| Hopper Temperature | 60 - 80 | °C | |
| Mold Temperature | 60 - 90 | °C |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yld, Type I, 5 mm/min | 51 | MPa | ASTM D638 |
| Tensile Stress, brk, Type I, 5 mm/min | 40 | MPa | ASTM D638 |
| Tensile Strain, yld, Type I, 50 mm/min | 4.7 | % | ASTM D638 |
| Tensile Strain, brk, Type I, 50 mm/min | 31 | % | ASTM D638 |
| Tensile Modulus, 5 mm/min | 2190 | MPa | ASTM D638 |
| Flexural Stress, brk, 1.3 mm/min, 50 mm span | 79 | MPa | ASTM D790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 2220 | MPa | ASTM D790 |
| Tensile Stress, yield, 5 mm/min | 49 | MPa | ISO 527 |
| Tensile Stress, break, 5 mm/min | 42 | MPa | ISO 527 |
| Tensile Strain, yield, 50 mm/min | 4.9 | % | ISO 527 |
| Tensile Strain, break, 50 mm/min | 50 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2090 | MPa | ISO 527 |
| Flexural Stress | 77 | MPa | ISO 178 |
| Flexural Modulus, 2 mm/min | 2110 | MPa | ISO 178 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.14 | - | ASTM D792 |
| Density | 1.13 | g/cm³ | ASTM D792 |
| Moisture Absorption, (23°C/50% RH/24 hrs) | 0.15 | % | ASTM D570 |
| Mold Shrinkage, flow, 24 hrs | 0.6 - 0.8 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 0.6 - 0.8 | % | ASTM D955 |
| Melt Flow Rate, 260°C/5.0 kgf | 30 | g/10 min | ASTM D1238 |
| Wear Factor Washer | 1250 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Wear Factor Ring | 7 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF | 0.23 | - | ASTM D3702 Modified: Manual |
| Static COF | 0.18 | - | ASTM D3702 Modified: Manual |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 1.82 MPa, 3.2mm, unannealed | 108 | °C | ASTM D648 |
| CTE, -30°C to 30°C, flow | 7.3E-05 | 1/°C | ASTM D696 |
| CTE, -30°C to 30°C, xflow | 7.8E-05 | 1/°C | ASTM D696 |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 125 | °C | ISO 75/Bf |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 110 | °C | ISO 75/Af |
Your PDF is downloading. Please wait.
