LNP LUBRICOMP OCP36A compound is based on Polyphenylene Sulfide (PPS) - branched resin containing 30% carbon fiber, 15% PTFE/silicone. Added features of this grade include: Wear Resistant, Electrically Conductive.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched 80*10*4 +23°C | 3 | kJ/m² | ISO 180/1A |
| Izod Impact, unnotched 80*10*4 +23°C | 13 | kJ/m² | ISO 180/1U |
| Multiaxial Impact | 1 | J | ISO 6603 |
| Izod Impact, notched, 23°C | 37 | J/m | ASTM D256 |
| Izod Impact, unnotched, 23°C | 320 | J/m | ASTM D4812 |
| Instrumented Dart Impact Energy @ peak, 23°C | 6 | J | ASTM D3763 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 120 - 150 | °C | |
| Drying Time | 4 | Hrs | |
| Melt Temperature | 315 - 320 | °C | |
| Front - Zone 3 Temperature | 330 - 345 | °C | |
| Middle - Zone 2 Temperature | 320 - 330 | °C | |
| Rear - Zone 1 Temperature | 305 - 315 | °C | |
| Mold Temperature | 140 - 165 | °C | |
| Back Pressure | 0.2 - 0.3 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yield | 113 | MPa | ISO 527 |
| Tensile Stress, break | 113 | MPa | ISO 527 |
| Tensile Strain, yield | 0.7 | % | ISO 527 |
| Tensile Strain, break | 0.7 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 19880 | MPa | ISO 527 |
| Flexural Stress | 176 | MPa | ISO 178 |
| Flexural Modulus | 19000 | MPa | ISO 178 |
| Tensile Stress, yield | 127 | MPa | ASTM D638 |
| Tensile Stress, break | 119 | MPa | ASTM D638 |
| Tensile Strain, yield | 0.9 | % | ASTM D638 |
| Tensile Strain, break | 1.6 | % | ASTM D638 |
| Tensile Modulus, 50 mm/min | 18610 | MPa | ASTM D638 |
| Flexural Stress | 229 | MPa | ASTM D790 |
| Flexural Modulus | 20130 | MPa | ASTM D790 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Mold Shrinkage, flow, 24 hrs | 0.15 | % | ISO 294 |
| Mold Shrinkage, xflow, 24 hrs | 0.66 | % | ISO 294 |
| Density | 1.49 | g/cm³ | ASTM D792 |
| Mold Shrinkage, flow, 24 hrs | 0.2 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 0.7 | % | ASTM D955 |
| Wear Factor Washer | 15 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF | 0.36 | - | ASTM D3702 Modified: Manual |
| Static COF | 0.3 | - | ASTM D3702 Modified: Manual |
| Density | 1.53 | g/cm³ | ISO 1183 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 248 | °C | ISO 75/Af |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 272 | °C | ISO 75/Bf |
| CTE, -40°C to 40°C, flow | 7.0E-06 | 1/°C | ISO 11359-2 |
| CTE, -40°C to 40°C, xflow | 3.60E-05 | 1/°C | ISO 11359-2 |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 273 | °C | ASTM D648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 258 | °C | ASTM D648 |
| CTE, -40°C to 40°C, flow | 7.20E-06 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 3.60E-05 | 1/°C | ASTM E831 |
| Relative Temp Index, Elec | 130 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 130 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 130 | °C | UL 746B |
Your PDF is downloading. Please wait.
