LNP LUBRICOMP QCL349 compound is based on Nylon 6/10 resin containing 15% PTFE, 20% carbon fiber. Added features of this grade include: Wear Resistant, Flame Retardant, Electrically Conductive.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched 80*10*4 +23°C | 5 | kJ/m² | ISO 180/1A |
| Izod Impact, unnotched 80*10*4 +23°C | 32 | kJ/m² | ISO 180/1U |
| Multiaxial Impact | 2 | J | ISO 6603 |
| Izod Impact, notched, 23°C | 53 | J/m | ASTM D256 |
| Izod Impact, unnotched, 23°C | 534 | J/m | ASTM D4812 |
| Instrumented Dart Impact Energy @ peak, 23°C | 4 | J | ASTM D3763 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4 | Hrs | |
| Maximum Moisture Content | 0.12 - 0.2 | % | |
| Melt Temperature | 270 - 275 | °C | |
| Front - Zone 3 Temperature | 270 - 280 | °C | |
| Middle - Zone 2 Temperature | 260 - 270 | °C | |
| Rear - Zone 1 Temperature | 250 - 260 | °C | |
| Mold Temperature | 80 - 95 | °C | |
| Back Pressure | 0.2 - 0.3 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yield | 162 | MPa | ISO 527 |
| Tensile Stress, break | 162 | MPa | ISO 527 |
| Tensile Strain, yield | 1.6 | % | ISO 527 |
| Tensile Strain, break | 1.6 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 15750 | MPa | ISO 527 |
| Flexural Stress | 239 | MPa | ISO 178 |
| Flexural Modulus | 13000 | MPa | ISO 178 |
| Tensile Stress, yield | 168 | MPa | ASTM D638 |
| Tensile Stress, break | 158 | MPa | ASTM D638 |
| Tensile Strain, yield | 1.8 | % | ASTM D638 |
| Tensile Strain, break | 1.9 | % | ASTM D638 |
| Tensile Modulus, 50 mm/min | 16540 | MPa | ASTM D638 |
| Flexural Stress | 241 | MPa | ASTM D790 |
| Flexural Modulus | 13100 | MPa | ASTM D790 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Density | 1.52 | g/cm³ | ISO 1183 |
| Mold Shrinkage, flow, 24 hrs | 0.11 | % | ISO 294 |
| Mold Shrinkage, xflow, 24 hrs | 0.78 | % | ISO 294 |
| Density | 1.52 | g/cm³ | ASTM D792 |
| Moisture Absorption, (23°C/50% RH/24 hrs) | 0.1 | % | ASTM D570 |
| Mold Shrinkage, flow, 24 hrs | 0.1 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 0.8 | % | ASTM D955 |
| Wear Factor Washer | 444 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
| Dynamic COF | 0.34 | - | ASTM D3702 Modified: Manual |
| Static COF | 0.28 | - | ASTM D3702 Modified: Manual |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 218 | °C | ISO 75/Bf |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 198 | °C | ISO 75/Af |
| CTE, -40°C to 40°C, flow | 1.90E-05 | 1/°C | ISO 11359-2 |
| CTE, -40°C to 40°C, xflow | 5.70E-05 | 1/°C | ISO 11359-2 |
| HDT, 0.45 MPa, 3.2 mm, unannealed | 217 | °C | ASTM D648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 200 | °C | ASTM D648 |
| CTE, -40°C to 40°C, flow | 1.98E-05 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 5.58E-05 | 1/°C | ASTM E831 |
| Relative Temp Index, Elec | 65 | °C | UL 746B |
| Relative Temp Index, Mech w/impact | 65 | °C | UL 746B |
| Relative Temp Index, Mech w/o impact | 65 | °C | UL 746B |
Your PDF is downloading. Please wait.
