ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+02 - 1.E+06 | Ω | ASTM D257 |
LNP LUBRICOMP UCL36S compound is based on Polyphthalamide (PPA) resin containing 15% PTFE, 30% carbon fiber. Added features of this grade include: Internally Lubricated, Wear Resistant, Heat Stabilized, Electrically Conductive.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+02 - 1.E+06 | Ω | ASTM D257 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 939 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 96 | J/m | ASTM D256 |
Izod Impact, unnotched 80*10*4 +23°C | 39 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 8 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.15 | % | |
Melt Temperature | 315 - 330 | °C | |
Front - Zone 3 Temperature | 325 - 340 | °C | |
Middle - Zone 2 Temperature | 315 - 325 | °C | |
Rear - Zone 1 Temperature | 310 - 320 | °C | |
Mold Temperature | 150 - 170 | °C | |
Back Pressure | 0.2 - 0.3 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, break | 216 | MPa | ASTM D638 |
Tensile Strain, break | 1.6 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 20130 | MPa | ASTM D638 |
Flexural Stress | 324 | MPa | ASTM D790 |
Flexural Modulus | 18820 | MPa | ASTM D790 |
Tensile Stress, break | 214 | MPa | ISO 527 |
Tensile Strain, break | 1.2 | % | ISO 527 |
Flexural Stress | 334 | MPa | ISO 178 |
Flexural Modulus | 22700 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.41 | g/cm³ | ASTM D792 |
Wear Factor Washer | 16 | 10^-10 in^5-min/ft-lb-hr | ASTM D3702 Modified: Manual |
Dynamic COF | 0.36 | - | ASTM D3702 Modified: Manual |
Static COF | 0.27 | - | ASTM D3702 Modified: Manual |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 3.2mm, unannealed | 279 | °C | ASTM D648 |
Your PDF is downloading. Please wait.