LNP™ LUBRICOMP™ Compound VCP36

LNP LUBRICOMP VCP36 compound is based on Super Tough Nylon resin containing 30% carbon fiber and 15% PTFE/SILICON. Added features of this grade include: Internally Lubricated, Electrically Conductive, Heat Stabilized, Wear Resistant.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polyamide 66 (Nylon 66)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Europe

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Electrically Conductive
Heat Stabilized
Lubricated
Structural
Wear and Friction
Wear resistant

Industry

Material previously used in

Automotive Under the Hood
Defense

Applications

Possible usage of material

All-Terrain Vehicle
Building Element
Defense Vehicles
Defense
Gear/Bearing/Slider
Refrigerator

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	8	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	35	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	8	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	35	kJ/m²	ISO 179/1eU
Izod Impact, notched, 23°C	66	J/m	ASTM D256
Izod Impact, unnotched, 23°C	335	J/m	ASTM D4812

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80	°C
Drying Time	4	Hrs
Maximum Moisture Content	0.15	%
Hopper Temperature	40 - 60	°C
Melt Temperature	285 - 300	°C
Rear - Zone 1 Temperature	265 - 290	°C
Middle - Zone 2 Temperature	275 - 300	°C
Front - Zone 3 Temperature	285 - 305	°C
Nozzle Temperature	285 - 300	°C
Mold Temperature	90 - 110	°C
Back Pressure	0.2 - 0.3	MPa
Screw speed (Circumferential speed)	0.15 - 0.25	m/s

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	17500	MPa	ISO 527
Tensile Stress, break, 5 mm/min	126	MPa	ISO 527
Tensile Strain, break, 5 mm/min	1	%	ISO 527
Flexural Modulus, 2 mm/min	13600	MPa	ISO 178
Flexural Strength, 2 mm/min	180	MPa	ISO 178
Tensile Modulus, 5 mm/min	17000	MPa	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min	94	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	1	%	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	12800	MPa	ASTM D790
Flexural Strength, 1.3 mm/min, 50 mm span	160	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.26	g/cm³	ISO 1183
Moisture Absorption, (23°C/50% RH/24hrs)	0.6	%	ISO 62-4
Mold Shrinkage, flow	0.1 - 0.3	%	SABIC method
Mold Shrinkage, xflow	0.1 - 0.3	%	SABIC method
Specific Gravity	1.26	-	ASTM D792
Wear Factor Washer	20	10^-10 in^5-min/ft-lb-hr	ASTM D3702 Modified: Instr.
Dynamic COF	0.85	-	ASTM D3702 Modified: Instr.
Static COF	0.82	-	ASTM D3702 Modified: Instr.

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	243	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	259	°C	ISO 75/Bf
HDT, 1.82 MPa, 3.2mm, unannealed	243	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	258	°C	ASTM D648
Vicat Softening Temp, Rate A/120	251	°C	ISO 306
Vicat Softening Temp, Rate B/120	250	°C	ISO 306
Vicat Softening Temp, Rate B/120	250	°C	ASTM D1525
CTE, -40°C to 40°C, flow	6.00E-06	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	6.00E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, flow	6.00E-06	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	6.00E-06	1/°C	ASTM E831

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES