LNP™ STAT-KON™ Compound DJ000ICX4

LNP STAT-KONTM DJ000ICX4 is a static dissipative compound based on Polycarbonate (PC) and Carbon Nano Tube. Added features of this grade include Electrically Conductive, Improved Processing.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Dimensional stability
Electrically Conductive
Good Processability
Heat Stabilized
High Flow
Impact resistant
Low ionics/Outgassing/Liquid particle count
No PFAS intentionally added
Thin Wall

Industry

Material previously used in

Mobile Phone - Computer - Tablets

Applications

Possible usage of material

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1E+03 - 1E+06	Ω	ASTM D257
Volume Resistivity	1E+04 - 1E+07	Ω.cm	ASTM D4496
Surface Resistivity, ROA	1E+04 - 1E+07	Ω	IEC 60093
Volume Resistivity	1E+01 - 1E+03	Ω.cm	SABIC method

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80103 +23°C*	29	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 -30°C*	3.8	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80103 +23°C*	70	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80103 -30°C*	44	kJ/m²	ISO 180/1U
*Izod Impact, notched 80104 +23°C*	17	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	2.2	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	125	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80104 -30°C*	57	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	26	kJ/m²	ISO 179/1eA
*Charpy -30°C, V-notch Edgew 80104 sp=62mm*	9.7	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	99	kJ/m²	ISO 179/1eU
*Charpy -30°C, Unnotch Edgew 80104 sp=62mm*	68	kJ/m²	ISO 179/1eU
Multi-Axial Instrumented Impact Total Energy, 23°C	11	J	ISO 6603-2
Multi-Axial Instrumented Impact Total Energy, -30°C	1.6	J	ISO 6603-2
Multi-Axial Instrumented Impact Energy @ peak, 23°C	10	J	ISO 6603-2
Multi-Axial Instrumented Impact Energy @ peak, -30°C	1.4	J	ISO 6603-2
Izod Impact, notched, 23°C	570	J/m	ASTM D256
Izod Impact, notched, -30°C	150	J/m	ASTM D256
Izod Impact, unnotched, 23°C	1710	J/m	ASTM D4812
Izod Impact, unnotched, -30°C	1490	J/m	ASTM D4812
Instrumented Dart Impact Total Energy, 23°C	9.8	J	ASTM D3763
Instrumented Dart Impact Total Energy, -30°C	2.7	J	ASTM D3763
Instrumented Dart Impact Energy @ peak, 23°C	9.1	J	ASTM D3763
Instrumented Dart Impact Energy @ peak, -30°C	2.4	J	ASTM D3763
Instrumented Dart Impact Peak Force, 23°C	7.7	N	ASTM D3763
Instrumented Dart Impact Peak Force, -30°C	3.7	N	ASTM D3763

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	110 - 120	°C
Drying Time	2 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Maximum Moisture Content	0.2	%
Melt Temperature	300 - 330	°C
Rear - Zone 1 Temperature	280 - 310	°C
Middle - Zone 2 Temperature	290 - 320	°C
Front - Zone 3 Temperature	300 - 330	°C
Nozzle Temperature	300 - 330	°C
Mold Temperature	80 - 120	°C
Back Pressure	0.3 - 0.7	MPa
Screw speed (Circumferential speed)	0.15 - 0.25	m/s

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	2400	MPa	ISO 527
Tensile Stress, yield, 50 mm/min	58	MPa	ISO 527
Tensile Stress, break, 50 mm/min	50	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	4.9	%	ISO 527
Tensile Nominal Strain, break, 50 mm/min	8.2	%	ISO 527
Flexural Stress, break, 2 mm/min	86	MPa	ISO 178
Flexural Stress at 3.5% strain, 2 mm/min	73	MPa	ISO 178
Flexural Modulus, 2 mm/min	2450	MPa	ISO 178
Flexural Strength, 2 mm/min	91	MPa	ISO 178
Tensile Modulus, 50 mm/min	2400	MPa	ASTM D638
Tensile Stress, yld, Type I, 50 mm/min	60	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min	50	MPa	ASTM D638
Tensile Strain, yld, Type I, 50 mm/min	5.5	%	ASTM D638
Tensile Nominal Strain, brk, Type I, 50 mm/min	7.5	%	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	95	MPa	ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span	84	MPa	ASTM D790
Flexural Stress at 5% strain, 1.3 mm/min, 50 mm span	90	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	2550	MPa	ASTM D790
Flexural Strength, 1.3 mm/min, 50 mm span	95	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.2	g/cm³	ISO 1183
Specific Gravity	1.2	-	ASTM D792
Melt Volume Rate, MVR at 300°C/5.0 kg	48	cm³/10 min	ISO 1133
Mold Shrinkage, flow	0.6 - 0.9	%	SABIC method
Mold Shrinkage, xflow	0.7 - 1.0	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Vicat Softening Temp, Rate A/50	147	°C	ISO 306
Vicat Softening Temp, Rate A/120	148	°C	ISO 306
Vicat Softening Temp, Rate B/50	139	°C	ISO 306
Vicat Softening Temp, Rate B/120	140	°C	ISO 306
CTE, -40°C to 40°C, flow	7.0E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	8.0E-05	1/°C	ISO 11359-2
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	123	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	134	°C	ISO 75/Bf
Ball Pressure Test, 125°C +/- 2°C	PASS	-	IEC 60695-10-2
Vicat Softening Temp, Rate A/50	147	°C	ASTM D1525
Vicat Softening Temp, Rate A/120	148	°C	ASTM D1525
Vicat Softening Temp, Rate B/50	139	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	140	°C	ASTM D1525
HDT, 1.82 MPa, 3.2mm, unannealed	122	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	134	°C	ASTM D648
CTE, -40°C to 40°C, flow	5.5E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	6.2E-05	1/°C	ASTM E831

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES