LNP™ STAT-KON™ Compound DJ000IXX3

LNP STAT-KON DJ000IXX3 is a static dissipative CNT compound based on Polycarbonate Copolymer, having an outstanding low temperature impact strength combined with excellent processing properties. This material has a fit in a broad range of markets, including electronics, mobility and industrial.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Amorphous
Antistatic
Dimensional stability
Enhanced mold release
Heat Stabilized
High Flow
Impact resistant
Low temperature impact
No PFAS intentionally added
Thermally Conductive
Thin Wall

Industry

Material previously used in

Electronic Components
Material Handling
Mobile Phone - Computer - Tablets

Applications

Possible usage of material

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1E+04 - 1E+07	Ω	ANSI/ESD STM11.11
Surface Resistivity	1E+04 - 1E+07	Ω	ASTM D257
Volume Resistivity	1E+01 - 1E+03	Ω.cm	SABIC method

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80103 +23°C*	70	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 +10°C*	67	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 0°C*	59	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 -10°C*	49	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 -20°C*	29	kJ/m²	ISO 180/1A
*Izod Impact, notched 80103 -30°C*	25	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80103 +23°C*	NB	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80103 -30°C*	NB	kJ/m²	ISO 180/1U
*Izod Impact, notched 80104 +23°C*	53	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 +10°C*	51	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 0°C*	51	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -10°C*	22	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -20°C*	20	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	16	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	NB	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80104 -30°C*	NB	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	60	kJ/m²	ISO 179/1eA
*Charpy -30°C, V-notch Edgew 80104 sp=62mm*	17	kJ/m²	ISO 179/1eA
Multi-Axial Instrumented Impact Total Energy, 23°C	65	J	ISO 6603-2
Multi-Axial Instrumented Impact Energy @ peak, 23°C	60	J	ISO 6603-2
Multi-Axial Instrumented Impact Total Energy, -30°C	60	J	ISO 6603-2
Multi-Axial Instrumented Impact Energy @ peak, -30°C	44	J	ISO 6603-2
Izod Impact, notched, 23°C	720	J/m	ASTM D256
Izod Impact, notched, -30°C	170	J/m	ASTM D256
Instrumented Dart Impact Total Energy, 23°C	44	J	ASTM D3763
Instrumented Dart Impact Energy @ peak, 23°C	39	J	ASTM D3763
Instrumented Dart Impact Peak Force, 23°C	5200	N	ASTM D3763
Instrumented Dart Impact Total Energy, -30°C	36	J	ASTM D3763
Instrumented Dart Impact Energy @ peak, -30°C	31	J	ASTM D3763
Instrumented Dart Impact Peak Force, -30°C	5160	N	ASTM D3763

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	110 - 120	°C
Drying Time	2 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Maximum Moisture Content	0.2	%
Melt Temperature	300 - 330	°C
Rear - Zone 1 Temperature	280 - 310	°C
Middle - Zone 2 Temperature	290 - 320	°C
Front - Zone 3 Temperature	300 - 330	°C
Nozzle Temperature	300 - 330	°C
Mold Temperature	80 - 120	°C
Back Pressure	0.3 - 0.7	MPa
Screw speed (Circumferential speed)	0.15 - 0.2	m/s

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	2400	MPa	ISO 527
Tensile Stress, yield, 50 mm/min	60	MPa	ISO 527
Tensile Stress, break, 50 mm/min	50	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	5.5	%	ISO 527
Tensile Nominal Strain, break, 50 mm/min	10	%	ISO 527
Flexural Modulus, 2 mm/min	2500	MPa	ISO 178
Flexural Strength, 2 mm/min	93	MPa	ISO 178
Tensile Stress, yld, Type I, 50 mm/min	60	MPa	ASTM D638
Tensile Stress, brk, Type I, 50 mm/min	50	MPa	ASTM D638
Tensile Strain, yld, Type I, 50 mm/min	5.5	%	ASTM D638
Tensile Nominal Strain, brk, Type I, 50 mm/min	11	%	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	2700	MPa	ASTM D790
Flexural Strength, 1.3 mm/min, 50 mm span	93	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.2	g/cm³	ISO 1183
Melt Volume Rate, MVR at 300°C/5.0 kg	17	cm³/10 min	ISO 1133
Mold shrinkage, flow (mold temp=100°C)	0.5 - 0.6	%	SABIC method
Mold shrinkage, xflow (mold temp=100°C)	0.5 - 0.6	%	SABIC method
Specific Gravity	1.2	-	ASTM D792

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	127	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	139	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/50	144	°C	ISO 306
Vicat Softening Temp, Rate B/120	144	°C	ISO 306
Vicat Softening Temp, Rate A/50	152	°C	ISO 306
Vicat Softening Temp, Rate A/120	153	°C	ISO 306
CTE, -40°C to 40°C, flow	6.3E-5	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	6.4E-5	1/°C	ISO 11359-2
HDT, 1.82 MPa, 3.2mm, unannealed	127	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	139	°C	ASTM D648
Vicat Softening Temp, Rate B/50	144	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	144	°C	ASTM D1525
Vicat Softening Temp, Rate A/50	152	°C	ASTM D1525
Vicat Softening Temp, Rate A/120	153	°C	ASTM D1525
CTE, -40°C to 40°C, flow	6.3E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	6.4E-5	1/°C	ASTM E831
Ball Pressure Test, 125°C +/- 2°C	PASS	-	IEC 60695-10-2

CAE Cards

Please login to view graphs, download multi-point data or literature

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES