ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+05 - 1.E+09 | Ω | ASTM D257 |
LNP STAT-KON DX05499 compound is based on Polycarbonate (PC) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive, Flame Retardant.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+05 - 1.E+09 | Ω | ASTM D257 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 2354 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 96 | J/m | ASTM D256 |
Instrumented Dart Impact Energy @ peak, 23°C | 25 | J | ASTM D3763 |
Multiaxial Impact | 34 | J | ISO 6603 |
Izod Impact, unnotched 80*10*4 +23°C | 137 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 9 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 305 - 325 | °C | |
Front - Zone 3 Temperature | 320 - 330 | °C | |
Middle - Zone 2 Temperature | 310 - 320 | °C | |
Rear - Zone 1 Temperature | 295 - 305 | °C | |
Mold Temperature | 80 - 110 | °C | |
Back Pressure | 0.2 - 0.3 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield | 67 | MPa | ASTM D638 |
Tensile Stress, break | 60 | MPa | ASTM D638 |
Tensile Strain, yield | 4.6 | % | ASTM D638 |
Tensile Strain, break | 8.3 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 2750 | MPa | ASTM D638 |
Flexural Stress | 101 | MPa | ASTM D790 |
Flexural Modulus | 3230 | MPa | ASTM D790 |
Tensile Stress, yield | 64 | MPa | ISO 527 |
Tensile Stress, break | 53 | MPa | ISO 527 |
Tensile Strain, yield | 4.3 | % | ISO 527 |
Tensile Strain, break | 12.6 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2800 | MPa | ISO 527 |
Flexural Stress | 108 | MPa | ISO 178 |
Flexural Modulus | 3100 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.34 | g/cm³ | ASTM D792 |
Moisture Absorption, (23°C/50% RH/24 hrs) | 0.11 | % | ASTM D570 |
Mold Shrinkage, flow, 24 hrs | 0.6 | % | ASTM D955 |
Mold Shrinkage, xflow, 24 hrs | 0.7 | % | ASTM D955 |
Mold Shrinkage, flow, 24 hrs | 0.64 | % | ISO 294 |
Mold Shrinkage, xflow, 24 hrs | 0.66 | % | ISO 294 |
Moisture Absorption (23°C / 50% RH) | 0.19 | % | ISO 62 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 132 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 120 | °C | ASTM D648 |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 122 | °C | ISO 75/Af |
Relative Temp Index, Elec | 80 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 80 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 80 | °C | UL 746B |
Your PDF is downloading. Please wait.