LNP™ STAT-KON™ Compound DX24355H

LNP STAT-KON DX24355H compound is based on Polycarbonate copolymer resin that has been designed towards injection moulding of electrically conductive components for the medical devices industry. Added features of this grade include: Electrically Conductive, Good Processability and Structural.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Europe

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Electrically Conductive
Good Processability
Healthcare
Structural

Industry

Material previously used in

General Healthcare
Patient Testing

Applications

Possible usage of material

Electronic Components
Medical Device

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

Electrical properties

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Volume resistivity	E-01 - E+00	Ω.cm	SABIC method

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, unnotched, 23°C	190	J/m	ASTM D4812
Izod Impact, notched, 23°C	55	J/m	ASTM D256
*Izod Impact, unnotched 80104 +23°C*	14	kJ/m²	ISO 180/1U
*Izod Impact, notched 80104 +23°C*	7	kJ/m²	ISO 180/1A
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	15	kJ/m²	ISO 179/1eU
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	6	kJ/m²	ISO 179/1eA

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	110 - 120	°C
Drying Time	2 - 4	Hrs
Drying Time (Cumulative)	8	Hrs
Maximum Moisture Content	0.2	%
Melt Temperature	300 - 330	°C
Rear - Zone 1 Temperature	280 - 310	°C
Middle - Zone 2 Temperature	290 - 320	°C
Front - Zone 3 Temperature	300 - 330	°C
Nozzle Temperature	300 - 330	°C
Mold Temperature	80 - 120	°C
Back Pressure	0.3 - 0.7	MPa
Screw speed (Circumferential speed)	0.15 - 0.2	m/s

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 5 mm/min	100	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	0.5	%	ASTM D638
Tensile Modulus, 5 mm/min	28000	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	160	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	22700	MPa	ASTM D790
Tensile Stress, break, 5 mm/min	115	MPa	ISO 527
Tensile Strain, break, 5 mm/min	0.5	%	ISO 527
Tensile Modulus, 1 mm/min	27700	MPa	ISO 527
Flexural Strength, 2 mm/min	170	MPa	ISO 178
Flexural Modulus, 2 mm/min	25000	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Melt Volume Rate, MVR at 300°C/5.0 kg	13	cm³/10 min	ISO 1133
Density	1.46	g/cm³	ISO 1183
Mold Shrinkage, flow	0.05 - 0.15	%	SABIC method
Mold Shrinkage, xflow	0.05 - 0.15	%	SABIC method
Water Absorption, (23°C/saturated)	0.07	%	ISO 62-1
Water Absorption, (23°C/24hrs)	0.16	%	ISO 62-1
Moisture Absorption, (23°C/50% RH/24hrs)	0.02	%	ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium)	0.04	%	ISO 62-4
Melt Flow Rate, 300°C/5.0 kgf	18	g/10 min	ASTM D1238
Specific Gravity	1.46	-	ASTM D792

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
CTE, -40°C to 40°C, flow	6.5E-06	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	4.7E-05	1/°C	ASTM E831
HDT, 1.82 MPa, 3.2mm, unannealed	129	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	139	°C	ASTM D648
Vicat Softening Temp, Rate B/50	137	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	140	°C	ASTM D1525
CTE, -40°C to 40°C, flow	6.5E-06	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	4.7E-05	1/°C	ISO 11359-2
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	130	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	140	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/50	137	°C	ISO 306
Vicat Softening Temp, Rate B/120	140	°C	ISO 306

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES