ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+04 - 1.E+08 | Ω | ASTM D257 |
LNP STAT-KON DX96717C compound is based on Polycarbonate (PC) resin containing conductive carbon powder. Added features of this grade include: Electrically Conductive, Flame Retardant.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+04 - 1.E+08 | Ω | ASTM D257 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Compliant, 94V-0 Flame Class Rating | 1.8 | mm | UL 94 by SABIC-IP |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 1831 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 64 | J/m | ASTM D256 |
Instrumented Dart Impact Energy @ peak, 23°C | 27 | J | ASTM D3763 |
Izod Impact, unnotched 80*10*4 +23°C | 123 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 9 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 120 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 305 - 325 | °C | |
Front - Zone 3 Temperature | 320 - 330 | °C | |
Middle - Zone 2 Temperature | 310 - 320 | °C | |
Rear - Zone 1 Temperature | 295 - 305 | °C | |
Mold Temperature | 80 - 110 | °C | |
Back Pressure | 0.2 - 0.3 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield | 63 | MPa | ASTM D638 |
Tensile Stress, break | 54 | MPa | ASTM D638 |
Tensile Strain, yield | 5 | % | ASTM D638 |
Tensile Strain, break | 9.9 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 2480 | MPa | ASTM D638 |
Flexural Stress | 98 | MPa | ASTM D790 |
Flexural Modulus | 2890 | MPa | ASTM D790 |
Tensile Stress, yield | 61 | MPa | ISO 527 |
Tensile Stress, break | 51 | MPa | ISO 527 |
Tensile Strain, yield | 4.7 | % | ISO 527 |
Tensile Strain, break | 11.1 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2700 | MPa | ISO 527 |
Flexural Stress | 98 | MPa | ISO 178 |
Flexural Modulus | 2800 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.3 | g/cm³ | ASTM D792 |
Moisture Absorption, (23°C/50% RH/24 hrs) | 0.17 | % | ASTM D570 |
Mold Shrinkage, flow, 24 hrs | 0.7 | % | ASTM D955 |
Mold Shrinkage, xflow, 24 hrs | 0.7 | % | ASTM D955 |
Mold Shrinkage, flow, 24 hrs | 0.75 | % | ISO 294 |
Mold Shrinkage, xflow, 24 hrs | 0.75 | % | ISO 294 |
Moisture Absorption (23°C / 50% RH) | 0.25 | % | ISO 62 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 143 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 131 | °C | ASTM D648 |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 135 | °C | ISO 75/Af |
Your PDF is downloading. Please wait.