ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Volume Resistivity | 5.E+03 - 5.E+06 | Ω.cm | ASTM D257 |
Surface Resistivity | 5.E+03 - 5.E+05 | Ω | ASTM D257 |
Static Decay, 5000V to <50V | <0.1 | Seconds | FTMS101B |
LNP STAT-KON EX11318C compound is based on Polyetherimide (PEI) resin containing 30% carbon fiber. Added features of this grade include: LNP Clean Compounding Technology, Low C18-C40 Hydrocarbons, Electrically Conductive, Dimensional Stability.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Volume Resistivity | 5.E+03 - 5.E+06 | Ω.cm | ASTM D257 |
Surface Resistivity | 5.E+03 - 5.E+05 | Ω | ASTM D257 |
Static Decay, 5000V to <50V | <0.1 | Seconds | FTMS101B |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | 0.4 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 375 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 48 | J/m | ASTM D256 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 150 | °C | |
Drying Time | 4 - 6 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 360 - 400 | °C | |
Rear - Zone 1 Temperature | 360 - 380 | °C | |
Middle - Zone 2 Temperature | 370 - 390 | °C | |
Front - Zone 3 Temperature | 380 - 400 | °C | |
Nozzle Temperature | 390 - 400 | °C | |
Mold Temperature | 140 - 180 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw speed (Circumferential speed) | 0.2 - 0.3 | m/s | |
Vent Depth | 0.025 - 0.076 | mm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, brk, Type I, 5 mm/min | 211 | MPa | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 1.9 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 21770 | MPa | ASTM D638 |
Flexural Stress, brk, 1.3 mm/min, 50 mm span | 270 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 18140 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.39 | g/cm³ | ASTM D792 |
Moisture Absorption, (23°C/50% RH/24 hrs) | 0.2 | % | ASTM D570 |
Mold Shrinkage, flow, 24 hrs | 0.1 - 0.2 | % | ASTM D955 |
Mold Shrinkage, xflow, 24 hrs | 0.15 - 0.25 | % | ASTM D955 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 6.4 mm, unannealed | 203 | °C | ASTM D648 |
CTE, -40°C to 40°C, flow | 4.6E-06 | 1/°C | ASTM E831 |
CTE, -40°C to 40°C, xflow | 4.3E-05 | 1/°C | ASTM E831 |
Relative Temp Index, Mech w/impact | 105 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 105 | °C | UL 746B |
Your PDF is downloading. Please wait.