LNP™ STAT-KON™ Compound KDF20G

LNP STAT-KON KDF20G compound is based on POM (Acetal) copolymer resin containing conductive carbon powder and glass fiber. Added features of this grade include: Low Warpage, Electrically Conductive.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Acetal (POM) Copolymer

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Europe

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Electrically Conductive
Low Warpage
No PFAS intentionally added

Industry

Material previously used in

Applications

Possible usage of material

Displays
Enclosure/Housing/Cover
Fuel Handling
Industrial Material Handling
Oil/Gas
Structural Support
Structure

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity, ROA	1.E+01 - 1.E+04	Ω	IEC 60093
Volume Resistivity	1.E+00 - 1.E+03	Ω.cm	IEC 60093
Volume Resistivity	1.E+00 - 1.E+03	Ω.cm	SABIC method
Surface Resistivity	1.E+01 - 1.E+04	Ω	ASTM D4496
Volume Resistivity	1.E+00 - 1.E+03	Ω.cm	ASTM D4496

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	2.5	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	16	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	2	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	20	kJ/m²	ISO 179/1eU
Izod Impact, notched, 23°C	29	J/m	ASTM D256
Izod Impact, unnotched, 23°C	225	J/m	ASTM D4812

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80	°C
Drying Time	4	Hrs
Melt Temperature	180 - 200	°C
Rear - Zone 1 Temperature	175 - 200	°C
Middle - Zone 2 Temperature	180 - 200	°C
Front - Zone 3 Temperature	180 - 200	°C
Nozzle Temperature	175 - 200	°C
Mold Temperature	80 - 120	°C
Back Pressure	0.2 - 0.3	MPa
Screw speed (Circumferential speed)	0.15 - 0.25	m/s

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	3900	MPa	ISO 527
Tensile Stress, break, 5 mm/min	50	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2	%	ISO 527
Flexural Modulus, 2 mm/min	3800	MPa	ISO 178
Flexural Strength, 2 mm/min	90	MPa	ISO 178
Tensile Modulus, 5 mm/min	4100	MPa	ASTM D638
Tensile Stress, yld, Type I, 5 mm/min	53	MPa	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min	53	MPa	ASTM D638
Tensile Strain, yld, Type I, 5 mm/min	2.7	%	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	1.4	%	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	3900	MPa	ASTM D790
Flexural Strength, 1.3 mm/min, 50 mm span	90	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.51	g/cm³	ISO 1183
Water Absorption, (23°C/24hrs)	0.16	%	ISO 62-1
Water Absorption, (23°C/saturated)	0.57	%	ISO 62-1
Moisture Absorption, (23°C/50% RH/24hrs)	0.03	%	ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium)	0.08	%	ISO 62-4
Mold Shrinkage, flow	1 - 2.5	%	SABIC method
Mold Shrinkage, xflow	1 - 2.5	%	SABIC method
Dynamic COF	0.5	-	ASTM D3702 Modified: Manual
Static COF	0.88	-	ASTM D3702 Modified: Manual

Polymer properties

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Melt volume rate (MVR)
– Melt Volume Rate, MVR at 190°C/5.0 kg	11	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	117	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	157	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/50	150	°C	ISO 306
Vicat Softening Temp, Rate B/120	151	°C	ISO 306
CTE, -40°C to 40°C, flow	7.6E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	9.0E-05	1/°C	ISO 11359-2
HDT, 1.82 MPa, 3.2mm, unannealed	120	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	159	°C	ASTM D648
Vicat Softening Temp, Rate B/50	150	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	151	°C	ASTM D1525
CTE, -40°C to 40°C, flow	7.6E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	9.0E-05	1/°C	ASTM E831

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity, ROA	1.E+01 - 1.E+04	Ω	IEC 60093
Volume Resistivity	1.E+00 - 1.E+03	Ω.cm	IEC 60093
Volume Resistivity	1.E+00 - 1.E+03	Ω.cm	SABIC method
Surface Resistivity	1.E+01 - 1.E+04	Ω	ASTM D4496
Volume Resistivity	1.E+00 - 1.E+03	Ω.cm	ASTM D4496

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	2.5	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	16	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	2	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	20	kJ/m²	ISO 179/1eU
Izod Impact, notched, 23°C	29	J/m	ASTM D256
Izod Impact, unnotched, 23°C	225	J/m	ASTM D4812

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80	°C
Drying Time	4	Hrs
Melt Temperature	180 - 200	°C
Rear - Zone 1 Temperature	175 - 200	°C
Middle - Zone 2 Temperature	180 - 200	°C
Front - Zone 3 Temperature	180 - 200	°C
Nozzle Temperature	175 - 200	°C
Mold Temperature	80 - 120	°C
Back Pressure	0.2 - 0.3	MPa
Screw speed (Circumferential speed)	0.15 - 0.25	m/s

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Modulus, 1 mm/min	3900	MPa	ISO 527
Tensile Stress, break, 5 mm/min	50	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2	%	ISO 527
Flexural Modulus, 2 mm/min	3800	MPa	ISO 178
Flexural Strength, 2 mm/min	90	MPa	ISO 178
Tensile Modulus, 5 mm/min	4100	MPa	ASTM D638
Tensile Stress, yld, Type I, 5 mm/min	53	MPa	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min	53	MPa	ASTM D638
Tensile Strain, yld, Type I, 5 mm/min	2.7	%	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	1.4	%	ASTM D638
Flexural Modulus, 1.3 mm/min, 50 mm span	3900	MPa	ASTM D790
Flexural Strength, 1.3 mm/min, 50 mm span	90	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.51	g/cm³	ISO 1183
Water Absorption, (23°C/24hrs)	0.16	%	ISO 62-1
Water Absorption, (23°C/saturated)	0.57	%	ISO 62-1
Moisture Absorption, (23°C/50% RH/24hrs)	0.03	%	ISO 62-4
Moisture Absorption, (23°C/50% RH/Equilibrium)	0.08	%	ISO 62-4
Mold Shrinkage, flow	1 - 2.5	%	SABIC method
Mold Shrinkage, xflow	1 - 2.5	%	SABIC method
Dynamic COF	0.5	-	ASTM D3702 Modified: Manual
Static COF	0.88	-	ASTM D3702 Modified: Manual

Polymer properties

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Melt volume rate (MVR)
– Melt Volume Rate, MVR at 190°C/5.0 kg	11	cm³/10 min	ISO 1133

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	117	°C	ISO 75/Af
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	157	°C	ISO 75/Bf
Vicat Softening Temp, Rate B/50	150	°C	ISO 306
Vicat Softening Temp, Rate B/120	151	°C	ISO 306
CTE, -40°C to 40°C, flow	7.6E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	9.0E-05	1/°C	ISO 11359-2
HDT, 1.82 MPa, 3.2mm, unannealed	120	°C	ASTM D648
HDT, 0.45 MPa, 3.2 mm, unannealed	159	°C	ASTM D648
Vicat Softening Temp, Rate B/50	150	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	151	°C	ASTM D1525
CTE, -40°C to 40°C, flow	7.6E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	9.0E-05	1/°C	ASTM E831

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES

LNP™ STAT-KON™ Compound KDF20G

Product Family

Polymer Family

Processing Technology

Where to buy

Colors

Features

Industry

Applications

Technical Datasheet Data

ELECTRICAL

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

Polymer properties

THERMAL

ELECTRICAL

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

Polymer properties

THERMAL

Related Documents

Technical Data Sheets

Register for High value Multi-Point Data