LNP™ STAT-KON™ Compound MFD02

LNP STAT-KON MFD02 compound is based on Polypropylene (PP) resin containing conductive carbon powder and 10% glass fiber. Added features of this grade include: Electrically Conductive.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polypropylene, Unspecified (PP, Unspecified)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Electrically Conductive
No PFAS intentionally added

Industry

Material previously used in

Electronic Components
Material Handling

Applications

Possible usage of material

Data Management
Electronic Components
Enclosures
ESD Tote/Cart
Fixture Bath/Shower
Fuel Handling
Heavy Vehicles
Industrial Material Handling
Personal Computing

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1.E+01 - 1.E+03	Ω	ASTM D257

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Izod Impact, notched 80104 +23°C*	15	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	27	kJ/m²	ISO 180/1U
Multiaxial Impact	11	J	ISO 6603
Izod Impact, notched, 23°C	133	J/m	ASTM D256
Izod Impact, unnotched, 23°C	379	J/m	ASTM D4812
Instrumented Dart Impact Energy @ peak, 23°C	16	J	ASTM D3763

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80	°C
Drying Time	4	Hrs
Melt Temperature	225 - 250	°C
Front - Zone 3 Temperature	240 - 250	°C
Middle - Zone 2 Temperature	215 - 225	°C
Rear - Zone 1 Temperature	195 - 205	°C
Mold Temperature	30 - 50	°C
Back Pressure	0.2 - 0.3	MPa
Screw Speed	30 - 60	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yield	28	MPa	ISO 527
Tensile Stress, break	23	MPa	ISO 527
Tensile Strain, yield	2.9	%	ISO 527
Tensile Strain, break	4.1	%	ISO 527
Tensile Modulus, 1 mm/min	2430	MPa	ISO 527
Flexural Stress	43	MPa	ISO 178
Flexural Modulus	2200	MPa	ISO 178
Tensile Stress, yield	28	MPa	ASTM D638
Tensile Stress, break	20	MPa	ASTM D638
Tensile Strain, yield	3.2	%	ASTM D638
Tensile Strain, break	6.1	%	ASTM D638
Tensile Modulus, 50 mm/min	2750	MPa	ASTM D638
Flexural Modulus	2060	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.05	g/cm³	ISO 1183
Mold Shrinkage, flow, 24 hrs	1.2	%	ISO 294
Mold Shrinkage, xflow, 24 hrs	1.2	%	ISO 294
Density	1.05	g/cm³	ASTM D792
Mold Shrinkage, flow, 24 hrs	1.1 - 1.3	%	ASTM D955
Mold Shrinkage, xflow, 24 hrs	1.1 - 1.3	%	ASTM D955

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	127	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	81	°C	ISO 75/Af
CTE, -40°C to 40°C, flow	6.40E-05	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	1.03E-04	1/°C	ISO 11359-2
HDT, 0.45 MPa, 3.2 mm, unannealed	133	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	85	°C	ASTM D648
CTE, -40°C to 40°C, flow	6.48E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	1.03E-04	1/°C	ASTM E831

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES