LNP STAT-LOY A3000TC compound is a ABS resin based electrically conductive material with transparency, low surface resistivity and high cleanliness. Added features of this grade include LNP Clean Compounding Technology. This material is targeted for jigs, fixtures and boxes for semi-conductor/electronics handling industry.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Surface Resistivity | 6.3E+9 | Ω | ASTM D257 |
| Volume Resistivity | 3.1E+10 | Ω.cm | ASTM D257 |
| Dielectric Constant | |||
| – 20 GHz | 2.62 | - | SABIC method |
| – 1.1 GHz | 2.82 | - | SABIC method |
| – 1.9 GHz | 2.81 | - | SABIC method |
| – 5 GHz | 2.75 | - | SABIC method |
| – 10 GHz | 2.76 | - | SABIC method |
| Dissipation Factor | |||
| – 1.1 GHz | 0.03593 | - | SABIC method |
| – 1.9 GHz | 0.03966 | - | SABIC method |
| – 5 GHz | 0.03223 | - | SABIC method |
| – 10 GHz | 0.02348 | - | SABIC method |
| – 20 GHz | 0.03636 | - | SABIC method |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, notched, 23°C | 138 | J/m | ASTM D256 |
| Izod Impact, unnotched, 23°C | 1610 | J/m | ASTM D4812 |
| Izod Impact, notched 80*10*4 +23°C | 11.6 | kJ/m² | ISO 180/1A |
| Izod Impact, unnotched 80*10*4 +23°C | 108.3 | kJ/m² | ISO 180/1U |
| Charpy | |||
| – 23°C, V-notch Edgew 80*10*4 sp=62mm | 12.25 | kJ/m² | ISO 179/1eA |
| – 23°C, Unnotch Edgew 80*10*4 sp=62mm | 95.64 | kJ/m² | ISO 179/1eU |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 75 - 80 | °C | |
| Drying Time | 6 - 8 | Hrs | |
| Melt Temperature | 240 - 260 | °C | |
| Nozzle Temperature | 240 - 260 | °C | |
| Front - Zone 3 Temperature | 240 - 260 | °C | |
| Middle - Zone 2 Temperature | 240 - 260 | °C | |
| Rear - Zone 1 Temperature | 240 - 260 | °C | |
| Mold Temperature | 40 - 60 | °C |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, brk, Type I, 50 mm/min | 29.8 | MPa | ASTM D638 |
| Tensile Strain, brk, Type I, 50 mm/min | 24.3 | % | ASTM D638 |
| Tensile Modulus, 50 mm/min | 2040 | MPa | ASTM D638 |
| Flexural Strength, 1.3 mm/min, 50 mm span | 55.6 | MPa | ASTM D790 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 1800 | MPa | ASTM D790 |
| Tensile Stress, break, 50 mm/min | 30 | MPa | ISO 527 |
| Tensile Strain, break, 50 mm/min | 20.3 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2010 | MPa | ISO 527 |
| Flexural Strength, 2 mm/min | 55.1 | MPa | ISO 178 |
| Flexural Modulus, 2 mm/min | 1874 | MPa | ISO 178 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Light Transmission, 1.0 mm | 88.4 | % | ASTM D1003 |
| Haze, 1.0 mm | 8.3 | % | ASTM D1003 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.11 | - | ASTM D792 |
| Melt Flow Rate | |||
| – 260°C/1.2 kgf | 12.1 | g/10 min | ASTM D1238 |
| Water Absorption, (23°C/24hrs) | 0.17 | % | ASTM D570 |
| Moisture Absorption (23°C / 50% RH) | 0.58 | % | ISO 62 |
| Mold Shrinkage, flow | 0.73 | % | SABIC method |
| Mold Shrinkage, xflow | 0.84 | % | SABIC method |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 0.45 MPa, 3.2 mm, unannealed | 79.2 | °C | ASTM D648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 68.9 | °C | ASTM D648 |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 75.8 | °C | ISO 75/Bf |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 65.3 | °C | ISO 75/Af |
| CTE, -40°C to 40°C, flow | 9.1E-5 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, xflow | 11.5E-5 | 1/°C | ASTM E831 |
| CTE, -40°C to 40°C, flow | 9.0E-5 | 1/°C | ISO 11359-2 |
| CTE, -40°C to 40°C, xflow | 12.1E-5 | 1/°C | ISO 11359-2 |
| Vicat Softening Temp, Rate B/120 | 80.6 | °C | ASTM D1525 |
| Vicat Softening Temp, Rate B/120 | 80.9 | °C | ISO 306 |
Your PDF is downloading. Please wait.
