LNP™ STAT-LOY™ Compound A3000U

LNP STAT-LOY A3000U compound is a ABS resin based electrically conductive material with colorability, low surface resistivity, high flow, high gloss and UV stabilization.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Acrylonitrile Butadiene Styrene (ABS)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Antistatic
No PFAS intentionally added
Weatherable/UV stable

Industry

Material previously used in

Electronic Components

Applications

Possible usage of material

Electronic Components

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1.3E+10	Ω	ASTM D257
Volume Resistivity	4.1E+10	Ω.cm	ASTM D257
Surface Resistivity	3.6E+9	Ω	ANSI/ESD STM11.13
Dielectric Constant, 1.1 GHz	2.96	-	SABIC method
Dissipation Factor, 1.1 GHz	0.03625	-	SABIC method
Dielectric Constant, 1.9 GHz	2.96	-	SABIC method
Dissipation Factor, 1.9 GHz	0.03508	-	SABIC method
Dielectric Constant, 5 GHz	2.87	-	SABIC method
Dissipation Factor, 5 GHz	0.02913	-	SABIC method
Dielectric Constant, 10 GHz	2.86	-	SABIC method
Dissipation Factor, 10 GHz	0.02235	-	SABIC method
Dielectric Constant, 20 GHz	2.69	-	SABIC method
Dissipation Factor, 20 GHz	0.03174	-	SABIC method

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	397	J/m	ASTM D256
Izod Impact, unnotched, 23°C	NB	J/m	ASTM D4812
*Izod Impact, notched 80104 +23°C*	25.8	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	NB	kJ/m²	ISO 180/1U
Charpy
– 23°C, V-notch Edgew 80104 sp=62mm	26.1	kJ/m²	ISO 179/1eA
– 23°C, Unnotch Edgew 80104 sp=62mm	NB	kJ/m²	ISO 179/1eU

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	80 - 85	°C
Drying Time	6 - 8	Hrs
Melt Temperature	220 - 240	°C
Nozzle Temperature	220 - 240	°C
Front - Zone 3 Temperature	220 - 240	°C
Middle - Zone 2 Temperature	220 - 240	°C
Rear - Zone 1 Temperature	220 - 240	°C
Mold Temperature	40 - 60	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 50 mm/min	24	MPa	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min	30.7	%	ASTM D638
Tensile Modulus, 50 mm/min	1514	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	45.4	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	1430	MPa	ASTM D790
Tensile Stress, break, 50 mm/min	23.2	MPa	ISO 527
Tensile Strain, break, 50 mm/min	39.3	%	ISO 527
Tensile Modulus, 1 mm/min	1496	MPa	ISO 527
Flexural Strength, 2 mm/min	42.7	MPa	ISO 178
Flexural Modulus, 2 mm/min	1444	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.06	-	ASTM D792
Melt Flow Rate, 230°C/5 kgf	20.3	g/10 min	ASTM D1238
Moisture Absorption (23°C / 50% RH)	0.22	%	ISO 62
Mold Shrinkage, flow	0.6	%	SABIC method
Mold Shrinkage, xflow	0.75	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	85.9	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	72.7	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	86.3	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	72.4	°C	ISO 75/Af
CTE, -40°C to 40°C, flow	8.9E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	10.9E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	8.7E-5	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	11.4E-4	1/°C	ISO 11359-2
Vicat Softening Temp, Rate B/120	84.3	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	86.4	°C	ISO 306

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES