LNP™ STAT-LOY™ Compound D3000EC

LNP STAT-LOY D3000EC compound is a Polycarbonate (PC) resin based electrically conductive material with colorability, low surface resistivity, high flow and high cleanliness. Added features of this grade include LNP Clean Compounding Technology. This material is targeted for jigs, fixtures, and boxes for semi-conductor/electronics handling industry.

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polycarbonate (PC)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Antistatic
High Flow
Low ionics/Outgassing/Liquid particle count
No PFAS intentionally added

Industry

Material previously used in

Electrical
Electronic Components
Material Handling

Applications

Possible usage of material

Electronic Components

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	2.2E+9	Ω	ASTM D257
Volume Resistivity	5.2E+9	Ω.cm	ASTM D257
Dielectric Constant, 1.1 GHz	3.09	-	SABIC method
Dissipation Factor, 1.1 GHz	0.04092	-	SABIC method
Dielectric Constant, 1.9 GHz	3.01	-	SABIC method
Dissipation Factor, 1.9 GHz	0.04146	-	SABIC method
Dielectric Constant, 5 GHz	2.96	-	SABIC method
Dissipation Factor, 5 GHz	0.03409	-	SABIC method
Dielectric Constant, 10 GHz	2.99	-	SABIC method
Dissipation Factor, 10 GHz	0.02491	-	SABIC method
Dielectric Constant, 20 GHz	2.79	-	SABIC method
Dissipation Factor, 20 GHz	0.02646	-	SABIC method

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	671	J/m	ASTM D256
Izod Impact, unnotched, 23°C	NB	J/m	ASTM D4812
*Izod Impact, notched 80104 +23°C*	47.8	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	NB	kJ/m²	ISO 180/1U
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	50.7	kJ/m²	ISO 179/1eA
*Charpy 23°C, Unnotch Edgew 80104 sp=62mm*	NB	kJ/m²	ISO 179/1eU

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	75 - 80	°C
Drying Time	6 - 8	Hrs
Melt Temperature	240 - 250	°C
Nozzle Temperature	240 - 250	°C
Front - Zone 3 Temperature	240 - 250	°C
Middle - Zone 2 Temperature	240 - 250	°C
Rear - Zone 1 Temperature	240 - 250	°C
Mold Temperature	40 - 60	°C

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 50 mm/min	27.3	MPa	ASTM D638
Tensile Strain, brk, Type I, 50 mm/min	11.58	%	ASTM D638
Tensile Modulus, 50 mm/min	1986	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	72.8	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	1790	MPa	ASTM D790
Tensile Stress, break, 50 mm/min	32	MPa	ISO 527
Tensile Strain, break, 50 mm/min	18.3	%	ISO 527
Tensile Modulus, 1 mm/min	2008	MPa	ISO 527
Flexural Strength, 2 mm/min	71.2	MPa	ISO 178
Flexural Modulus, 2 mm/min	1902	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.2	-	ASTM D792
Melt Flow Rate
– 240°C/1.2 kgf	12	g/10 min	ASTM D1238
Water Absorption, (23°C/24hrs)	0.13	%	ASTM D570
Mold Shrinkage, flow	0.62	%	SABIC method
Mold Shrinkage, xflow	0.80	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	105	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	92	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	102	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	86.1	°C	ISO 75/Af
CTE, -40°C to 40°C, flow	7.6E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	9.3E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	7.6E-5	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	9.8E-5	1/°C	ISO 11359-2
Vicat Softening Temp, Rate B/120	108	°C	ASTM D1525
Vicat Softening Temp, Rate B/120	109	°C	ISO 306

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES