ELECTRICAL
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+09 - 1.E+11 | Ω | ASTM D257 |
LNP STAT-LOY PF303 compound is based on Nylon 6 resin containing 15% glass fiber. Added features of this grade include: Permanently Anti-Static.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+09 - 1.E+11 | Ω | ASTM D257 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 700 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 95 | J/m | ASTM D256 |
Multiaxial Impact | 2 | J | ISO 6603 |
Instrumented Dart Impact Total Energy, 23°C | 10 | J | ASTM D3763 |
Izod Impact, unnotched 80*10*4 +23°C | 44 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 9 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.15 - 0.25 | % | |
Melt Temperature | 265 - 275 | °C | |
Front - Zone 3 Temperature | 275 - 290 | °C | |
Middle - Zone 2 Temperature | 265 - 275 | °C | |
Rear - Zone 1 Temperature | 250 - 260 | °C | |
Mold Temperature | 80 - 95 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yld, Type I, 5 mm/min | 82 | MPa | ASTM D638 |
Tensile Stress, brk, Type I, 5 mm/min | 74 | MPa | ASTM D638 |
Tensile Strain, yld, Type I, 5 mm/min | 2.2 | % | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 2.3 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 5200 | MPa | ASTM D638 |
Flexural Stress, yld, 1.3 mm/min, 50 mm span | 121 | MPa | ASTM D790 |
Flexural Stress, brk, 1.3 mm/min, 50 mm span | 120 | MPa | ASTM D790 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 4250 | MPa | ASTM D790 |
Tensile Stress, yield, 5 mm/min | 72 | MPa | ISO 527 |
Tensile Stress, break, 5 mm/min | 68 | MPa | ISO 527 |
Tensile Strain, yield, 5 mm/min | 2.3 | % | ISO 527 |
Tensile Strain, break, 5 mm/min | 2.8 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 4740 | MPa | ISO 527 |
Flexural Stress | 103 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 4250 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Specific Gravity | 1.25 | - | ASTM D792 |
Density | 1.25 | g/cm³ | ASTM D792 |
Mold Shrinkage, flow, 24 hrs | 0.5 - 0.7 | % | ASTM D955 |
Mold Shrinkage, xflow, 24 hrs | 0.9 - 2 | % | ASTM D955 |
Density | 1.24 | g/cm³ | ISO 1183 |
Moisture Absorption (23°C / 50% RH) | 6.6 | % | ISO 62 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 0.45 MPa, 3.2 mm, unannealed | 207 | °C | ASTM D648 |
HDT, 1.82 MPa, 3.2mm, unannealed | 185 | °C | ASTM D648 |
CTE, -30°C to 30°C, flow | 3.1E-05 | 1/°C | ASTM D696 |
CTE, -30°C to 30°C, xflow | 1.37E-04 | 1/°C | ASTM D696 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 204 | °C | ISO 75/Bf |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 181 | °C | ISO 75/Af |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Surface Resistivity | 1.E+09 - 1.E+11 | Ω | ASTM D257 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched, 23°C | 700 | J/m | ASTM D4812 |
Izod Impact, notched, 23°C | 95 | J/m | ASTM D256 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.15 - 0.25 | % | |
Melt Temperature | 230 | °C | |
Front - Zone 3 Temperature | 225 - 240 | °C | |
Middle - Zone 2 Temperature | 220 - 230 | °C | |
Rear - Zone 1 Temperature | 215 - 225 | °C | |
Mold Temperature | 80 - 95 | °C | |
Back Pressure | 0.3 - 0.7 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, break | 82 | MPa | ASTM D638 |
Tensile Strain, break | 2.5 | % | ASTM D638 |
Tensile Modulus, 50 mm/min | 5200 | MPa | ASTM D638 |
Flexural Stress | 124 | MPa | ASTM D790 |
Flexural Modulus | 4080 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.25 | g/cm³ | ASTM D792 |
Mold Shrinkage, flow, 24 hrs | 0.3 | % | ASTM D955 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 3.2mm, unannealed | 185 | °C | ASTM D648 |
Your PDF is downloading. Please wait.