LNP THERMOCOMP 9X10401H compound is based on Polyphenylsulfone (PPSU) containing proprietary fillers. Added features of this grade include: Healthcare, X-Ray Opaque.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, unnotched, 23°C | 1640 | J/m | ASTM D4812 |
| Izod Impact, notched, 23°C | 86 | J/m | ASTM D256 |
| Multiaxial Impact | 29 | J | ISO 6603 |
| Instrumented Dart Impact Total Energy, 23°C | 34 | J | ASTM D3763 |
| Izod Impact, unnotched 80*10*4 +23°C | 175 | kJ/m² | ISO 180/1U |
| Izod Impact, notched 80*10*4 +23°C | 8 | kJ/m² | ISO 180/1A |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 150 | °C | |
| Drying Time | 2.5 | Hrs | |
| Maximum Moisture Content | 0.05 | % | |
| Melt Temperature | 340 - 390 | °C | |
| Front - Zone 3 Temperature | 350 | °C | |
| Middle - Zone 2 Temperature | 350 | °C | |
| Rear - Zone 1 Temperature | 320 | °C | |
| Mold Temperature | 140 - 160 | °C | |
| Back Pressure | 0.3 - 0.7 | MPa |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, yld, Type I, 5 mm/min | 72 | MPa | ASTM D638 |
| Tensile Stress, brk, Type I, 5 mm/min | 57 | MPa | ASTM D638 |
| Tensile Strain, yld, Type I, 5 mm/min | 7 | % | ASTM D638 |
| Tensile Strain, brk, Type I, 5 mm/min | 12 | % | ASTM D638 |
| Tensile Modulus, 5 mm/min | 2660 | MPa | ASTM D638 |
| Flexural Modulus, 1.3 mm/min, 50 mm span | 2720 | MPa | ASTM D790 |
| Tensile Stress, yield, 5 mm/min | 71 | MPa | ISO 527 |
| Tensile Stress, break, 5 mm/min | 57 | MPa | ISO 527 |
| Tensile Strain, yield, 5 mm/min | 7 | % | ISO 527 |
| Tensile Strain, break, 5 mm/min | 12 | % | ISO 527 |
| Tensile Modulus, 1 mm/min | 2550 | MPa | ISO 527 |
| Flexural Modulus, 2 mm/min | 2570 | MPa | ISO 178 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Specific Gravity | 1.46 | - | ASTM D792 |
| Density | 1.45 | g/cm³ | ASTM D792 |
| Moisture Absorption, (23°C/50% RH/24 hrs) | 0.26 | % | ASTM D570 |
| Mold Shrinkage, flow, 24 hrs | 0.8 - 1 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 1 - 3 | % | ASTM D955 |
| Moisture Absorption (23°C / 50% RH) | 0.47 | % | ISO 62 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 0.45 MPa, 3.2 mm, unannealed | 214 | °C | ASTM D648 |
| HDT, 1.82 MPa, 3.2mm, unannealed | 203 | °C | ASTM D648 |
| CTE, -30°C to 30°C, flow | 5.3E-05 | 1/°C | ASTM D696 |
| CTE, -30°C to 30°C, xflow | 5.3E-05 | 1/°C | ASTM D696 |
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 213 | °C | ISO 75/Bf |
| HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 200 | °C | ISO 75/Af |
Your PDF is downloading. Please wait.
