FLAME CHARACTERISTICS
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥0.8 | mm | UL 94 |
LNP THERMOCOMP D351RC compound is based on recycled Polycarbonate (PC) resin containing 30% glass fiber. Added features of this grade include: High Modulus, Low Warpage, Good Ductility, Non-Brominated & Non-Chlorinated Flame Retardant. Post-Consumer Recycling (PCR) Polycarbonate content up to 35%.
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
UL Yellow Card Link | View | - | - |
UL Recognized, 94V-0 Flame Class Rating | ≥0.8 | mm | UL 94 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, notched, 23°C | 128 | J/m | ASTM D256 |
Izod Impact, unnotched, 23°C | 537 | J/m | ASTM D4812 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 110 | °C | |
Drying Time | 3 - 6 | Hrs | |
Maximum Moisture Content | 0.02 | % | |
Melt Temperature | 285 - 310 | °C | |
Nozzle Temperature | 285 - 305 | °C | |
Front - Zone 3 Temperature | 280 - 300 | °C | |
Middle - Zone 2 Temperature | 270 - 290 | °C | |
Rear - Zone 1 Temperature | 260 - 280 | °C | |
Mold Temperature | 80 - 110 | °C | |
Back Pressure | 0.1 - 0.3 | MPa | |
Screw Speed | 50 - 90 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, brk, Type I, 5 mm/min | 129 | MPa | ASTM D638 |
Tensile Strain, brk, Type I, 5 mm/min | 2.2 | % | ASTM D638 |
Tensile Modulus, 5 mm/min | 9415 | MPa | ASTM D638 |
Flexural Modulus, 1.3 mm/min, 50 mm span | 8390 | MPa | ASTM D790 |
Flexural Stress, brk, 1.3 mm/min, 50 mm span | 180 | MPa | ASTM D790 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Density | 1.425 | g/cm³ | ASTM D792 |
Mold Shrinkage, xflow, 24 hrs | 0.1 - 0.3 | % | ASTM D955 |
Mold Shrinkage, flow, 24 hrs | 0.1 - 0.3 | % | ASTM D955 |
Melt Flow Rate, 300°C/2.16 kgf | 27.3 | g/10 min | ASTM D1238 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
HDT, 1.82 MPa, 3.2mm, unannealed | 119 | °C | ASTM D648 |
CTE, -40°C to 40°C, flow | 1.9E-05 | 1/°C | ASTM E831 |
CTE, -40°C to 40°C, xflow | 6.9E-05 | 1/°C | ASTM E831 |
Relative Temp Index, Elec | 80 | °C | UL 746B |
Relative Temp Index, Mech w/impact | 80 | °C | UL 746B |
Relative Temp Index, Mech w/o impact | 80 | °C | UL 746B |
Your PDF is downloading. Please wait.