EXTRUSION
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 | °C | |
Drying Time | 2 - 4 | Hrs | |
Barrel - Zone 1 Temperature | 200 - 250 | °C | |
Melt Temperature | 230 - 300 | °C |
LNP THERMOCOMP* M10006P compound is based on Polypropylene (PP) resin containing non-halogenated Flame retardant suitable for use in composites and extrusion.
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 | °C | |
Drying Time | 2 - 4 | Hrs | |
Barrel - Zone 1 Temperature | 200 - 250 | °C | |
Melt Temperature | 230 - 300 | °C |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched 80*10*4 +23°C | 18 | kJ/m² | ISO 180/1U |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, yield, 50 mm/min | 24 | MPa | ISO 527 |
Tensile Strain, yield, 50 mm/min | 3.7 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 2060 | MPa | ISO 527 |
Flexural Strength, 2 mm/min | 40 | MPa | ISO 178 |
Flexural Modulus, 2 mm/min | 1830 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Melt Volume Rate, MVR at 230°C/2.16 kg | 70 | cm³/10 min | ISO 1133 |
Your PDF is downloading. Please wait.