LNP™ THERMOCOMP™ Compound OCF62E

LNP THERMOCOMP OCF62E compound is based on linear Polyphenylene Sulfide (PPS) resin containing 10% carbon fiber, 30% glass fiber. Added features of this grade include: Electrically Conductive, Easy Molding

Product Family

LNP™ COMPOUNDS AND PC COPOLYMER RESINS

Polymer Family

Polyphenylene Sulfide, Linear (PPS, Linear)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Carbon fiber filled
Electrically Conductive
Good Processability
High stiffness/Strength
No PFAS intentionally added

Industry

Material previously used in

Building Component
Commercial Appliance
Electrical
Home Appliances
Mobile Phone - Computer - Tablets
Personal Accessory
Sport/Leisure

Applications

Possible usage of material

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, unnotched, 23°C	260	J/m	ASTM D4812
Izod Impact, notched, 23°C	63	J/m	ASTM D256
*Izod Impact, unnotched 80104 +23°C*	13	kJ/m²	ISO 180/1U
*Izod Impact, notched 80104 +23°C*	6	kJ/m²	ISO 180/1A

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	120 - 150	°C
Drying Time	4	Hrs
Melt Temperature	315 - 320	°C
Front - Zone 3 Temperature	330 - 345	°C
Middle - Zone 2 Temperature	320 - 330	°C
Rear - Zone 1 Temperature	305 - 315	°C
Mold Temperature	140 - 165	°C
Back Pressure	0.2 - 0.3	MPa
Screw Speed	30 - 60	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yld, Type I, 5 mm/min	157	MPa	ASTM D638
Tensile Stress, brk, Type I, 5 mm/min	157	MPa	ASTM D638
Tensile Strain, yld, Type I, 5 mm/min	0.7	%	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	0.7	%	ASTM D638
Tensile Modulus, 5 mm/min	30320	MPa	ASTM D638
Flexural Stress, yld, 1.3 mm/min, 50 mm span	205	MPa	ASTM D790
Flexural Stress, brk, 1.3 mm/min, 50 mm span	206	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	19070	MPa	ASTM D790
Tensile Stress, yield, 5 mm/min	133	MPa	ISO 527
Tensile Stress, break, 5 mm/min	133	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	0.5	%	ISO 527
Tensile Strain, break, 5 mm/min	0.5	%	ISO 527
Tensile Modulus, 1 mm/min	28600	MPa	ISO 527
Flexural Modulus, 2 mm/min	20560	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Density	1.66	g/cm³	ASTM D792
Mold Shrinkage, flow, 24 hrs	0.1 - 0.4	%	ASTM D955
Mold Shrinkage, xflow, 24 hrs	0.7 - 1	%	ASTM D955
Density	1.66	g/cm³	ISO 1183

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	280	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	267	°C	ASTM D648
CTE, -40°C to 40°C, flow	1.02E-05	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	4.6E-05	1/°C	ASTM E831
CTE, 23°C to 60°C, flow	1.02E-05	1/°C	ISO 11359-2
CTE, 23°C to 60°C, xflow	4.6E-05	1/°C	ISO 11359-2
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	281	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	268	°C	ISO 75/Af

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES