LNP THERMOCOMP RZ006 compound is based on Nylon 6/6 resin containing 30% milled glass.
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Izod Impact, unnotched, 23°C | 320 | J/m | ASTM D4812 |
| Izod Impact, notched, 23°C | 32 | J/m | ASTM D256 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Drying Time | 4 | Hrs | |
| Maximum Moisture Content | 0.15 - 0.25 | % | |
| Melt Temperature | 280 - 305 | °C | |
| Front - Zone 3 Temperature | 295 - 305 | °C | |
| Middle - Zone 2 Temperature | 280 - 295 | °C | |
| Rear - Zone 1 Temperature | 265 - 275 | °C | |
| Mold Temperature | 95 - 110 | °C | |
| Back Pressure | 0.2 - 0.3 | MPa | |
| Screw Speed | 30 - 60 | rpm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Stress, break | 68 | MPa | ASTM D638 |
| Tensile Strain, break | 4.3 | % | ASTM D638 |
| Flexural Stress | 119 | MPa | ASTM D790 |
| Flexural Modulus | 4300 | MPa | ASTM D790 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Density | 1.39 | g/cm³ | ASTM D792 |
| Mold Shrinkage, flow, 24 hrs | 1.4 | % | ASTM D955 |
| Mold Shrinkage, xflow, 24 hrs | 1.5 | % | ASTM D955 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT, 1.82 MPa, 3.2mm, unannealed | 115 | °C | ASTM D648 |
Your PDF is downloading. Please wait.
