IMPACT
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched 80*10*4 +23°C | 100 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 53 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -40°C | 43 | kJ/m² | ISO 180/1A |
LNP VERTON RV00CE is a compound based on Polyamide 66 (Nylon 66) resin containing 60% long glass fiber. Added features include Easy Molding and Structural.
You can get in touch with us in these regions to buy the material
All colors are customizable. Refer our ColorXpress tool to check color availability
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Izod Impact, unnotched 80*10*4 +23°C | 100 | kJ/m² | ISO 180/1U |
Izod Impact, notched 80*10*4 +23°C | 53 | kJ/m² | ISO 180/1A |
Izod Impact, notched 80*10*4 -40°C | 43 | kJ/m² | ISO 180/1A |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Drying Temperature | 80 | °C | |
Drying Time | 4 | Hrs | |
Maximum Moisture Content | 0.15 - 0.25 | % | |
Melt Temperature | 290 - 305 | °C | |
Front - Zone 3 Temperature | 290 - 300 | °C | |
Middle - Zone 2 Temperature | 290 - 300 | °C | |
Rear - Zone 1 Temperature | 280 - 295 | °C | |
Mold Temperature | 95 - 110 | °C | |
Back Pressure | 0.2 - 0.3 | MPa | |
Screw Speed | 30 - 60 | rpm |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Tensile Stress, break, 5 mm/min | 270 | MPa | ISO 527 |
Tensile Strain, break, 5 mm/min | 1.7 | % | ISO 527 |
Tensile Modulus, 1 mm/min | 21600 | MPa | ISO 527 |
Flexural Stress, break, 2 mm/min | 430 | MPa | ISO 178 |
Flexural Strain, break, 2 mm/min | 2.6 | % | ISO 178 |
Flexural Modulus, 2 mm/min | 19000 | MPa | ISO 178 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
Mold Shrinkage, flow | 0.26 | % | SABIC method |
Mold Shrinkage, xflow | 0.61 | % | SABIC method |
Density | 1.71 | g/cm³ | ISO 1183 |
Water Absorption, (23°C/24hrs) | 0.9 | % | ISO 62-1 |
Moisture Absorption (23°C / 50% RH) | 1.1 | % | ISO 62 |
PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
---|---|---|---|
CTE, 23°C to 60°C, flow | 1.7E-05 | 1/°C | ISO 11359-2 |
CTE, 23°C to 60°C, xflow | 5.3E-05 | 1/°C | ISO 11359-2 |
HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 255 | °C | ISO 75/Bf |
HDT/Af, 1.8 MPa Flatw 80*10*4 sp=64mm | 252 | °C | ISO 75/Af |
Your PDF is downloading. Please wait.