NORYL GTX APS130 resin is a 30% glass fiber reinforced alloy of Polyphenylene Ether (PPE) + Polyphenylene Sulfide (PPS). This injection moldable grade has high stiffness, excellent chemical resistance, and high heat resistance. NORYL APS130 resin is an excellent candidate for automotive under-the-hood applications such as ignition systems and electrical components
All colors are customizable. Refer our ColorXpress tool to check color availability
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Volume Resistivity | 1.2E+17 | Ω.cm | ASTM D257 |
| Comparative Tracking Index | 150 | V | IEC 60112 |
| Surface Resistivity | 1E+16 | Ω | ASTM D257 |
| Dielectric Strength, in oil, 1.6 mm | 22.1 | kV/mm | ASTM D149 |
| Relative Permittivity, 50/60 Hz | 3.3 | - | ASTM D150 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Charpy 23°C, Unnotch Edgew 80*10*4 sp=62mm | 59 | kJ/m² | ISO 179/1eU |
| Charpy 23°C, V-notch Edgew 80*10*3 sp=62mm | 21 | kJ/m² | ISO 179/1eA |
| Charpy -30°C, Unnotch Edgew 80*10*4 sp=62mm | 22 | kJ/m² | ISO 179/1eU |
| Charpy -30°C, V-notch Edgew 80*10*4 sp=62mm | 6 | kJ/m² | ISO 179/1eA |
| Izod Impact, notched, 23°C | 88 | J/m | ASTM D256 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Drying Temperature | 120 - 150 | °C | |
| Drying Time | 4 - 8 | Hrs | |
| Drying Time (Cumulative) | 24 | Hrs | |
| Maximum Moisture Content | 0.02 | % | |
| Melt Temperature | 300 - 330 | °C | |
| Nozzle Temperature | 300 - 330 | °C | |
| Front - Zone 3 Temperature | 295 - 330 | °C | |
| Middle - Zone 2 Temperature | 290 - 320 | °C | |
| Rear - Zone 1 Temperature | 280 - 315 | °C | |
| Mold Temperature | 95 - 150 | °C | |
| Back Pressure | 0.7 - 1.4 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Shot to Cylinder Size | 40 - 60 | % | |
| Vent Depth | 0.025 - 0.076 | mm |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Tensile Modulus, 1 mm/min | 6640 | MPa | ISO 527 |
| Tensile Strain, break, 5 mm/min | 1.5 | % | ISO 527 |
| Flexural Modulus, 2 mm/min | 8110 | MPa | ISO 178 |
| Flexural Stress, break, 2 mm/min | 170 | MPa | ISO 178 |
| Tensile Stress, break, 5 mm/min | 120 | MPa | ISO 527 |
| Tensile Stress, yield | 112 | MPa | SABIC - Japan Method |
| Tensile Strain, break | 8 | % | SABIC - Japan Method |
| Flexural Stress | 156 | MPa | ASTM D790 |
| Flexural Modulus | 8430 | MPa | ASTM D790 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| Density | 1.44 | g/cm³ | ISO 1183 |
| Mold Shrinkage, flow | 0.13 | % | SABIC method |
| Mold Shrinkage, xflow | 0.16 | % | SABIC method |
| Specific Gravity | 1.44 | - | ASTM D792 |
| Water Absorption, (23°C/24hrs) | 0.02 | % | ASTM D570 |
| Mold Shrinkage, flow, 3.2 mm | 0.25 - 0.7 | % | SABIC method |
| Melt Flow Rate, 300°C/5.0 kgf | 29.1 | g/10 min | ASTM D1238 |
| PROPERTIES | TYPICAL VALUES | UNITS | TEST METHODS |
|---|---|---|---|
| HDT/Bf, 0.45 MPa Flatw 80*10*4 sp=64mm | 264 | °C | ISO 75/Bf |
| HDT, 0.45 MPa, 6.4 mm, unannealed | 267 | °C | ASTM D648 |
| CTE, -30°C to 30°C | 0.000025 - 0.000055 | 1/°C | TMA |
view multipoint data represented visually on graphs.
You may click on the curve legends to select/unselect the curves.
Please login to view graphs, download multi-point data or literature
Please login to view graphs, download multi-point data or literature
Your PDF is downloading. Please wait.
