NORYL GTX™ Resin APS430

NORYL GTX™ APS430 resin is a 30% glass reinforced alloy of Polyphenylene Ether (PPE) + Polyphenylene Sulfide (PPS). This injection moldable grade has a UL V0 flame rating, non-brominated, non-chlorinated FR, high stiffness, excellent chemical resistance, and high heat resistance. NORYL GTX APS430 resin is an excellent candidate for electrical and lighting connector applications.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PPS (PPE+PPS)

Processing Technology

Where to buy

You can get in touch with us in these regions to buy the material

Asia
Europe

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Chemical Resistance
Creep resistant
Flame Retardant
High stiffness/Strength
Hydrolytic Stability
Low Warpage
No PFAS intentionally added
Non Cl/Br flame retardant
Non halogenated flame retardant

Industry

Material previously used in

Electrical
Water Management

Applications

Possible usage of material

Electronic Components
Plumbing

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	1.E+16	Ω	ASTM D257
Relative Permittivity, 50/60 Hz	3.3	-	ASTM D150

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Yellow Card Link	View	-	-
UL Recognized, 94V-0 Flame Class Rating	0.8	mm	UL 94

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	78	J/m	ASTM D256

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	120 - 150	°C
Drying Time	2 - 5	Hrs
Melt Temperature	290 - 310	°C
Rear - Zone 1 Temperature	280 - 300	°C
Middle - Zone 2 Temperature	280 - 310	°C
Front - Zone 3 Temperature	280 - 310	°C
Nozzle Temperature	290 - 310	°C
Mold Temperature	120 - 140	°C
Screw Speed	40 - 60	rpm
Back pressure (Plastic Pressure)	5 - 14	MPa

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, yield	122	MPa	SABIC - Japan Method
Tensile Strain, break	10	%	SABIC - Japan Method
Flexural Stress	166	MPa	ASTM D790
Flexural Modulus	8620	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.48	-	ASTM D792
Water Absorption, (23°C/24hrs)	0.02	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	0.3 - 0.7	%	SABIC method
Melt Flow Rate, 300°C/5.0 kgf	43.6	g/10 min	ASTM D1238

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 1.82 MPa, 6.4 mm, unannealed	255	°C	ASTM D648
CTE, -30°C to 30°C	1.8E-05 - 5.8E-05	1/°C	TMA

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Volume Resistivity	2.1E+15	Ω.cm	ASTM D257
Comparative Tracking Index	150	V	IEC 60112
Surface Resistivity	1.E+16	Ω	ASTM D257
Relative Permittivity, 50/60 Hz	3.3	-	ASTM D150

FLAME CHARACTERISTICS

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
UL Recognized, 94V-0 Flame Class Rating	0.8	mm	UL 94

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*Charpy -30°C, Unnotch Edgew 80104 sp=62mm*	27	kJ/m²	ISO 179/1eU
*Charpy -30°C, V-notch Edgew 80104 sp=62mm*	7	kJ/m²	ISO 179/1eA
*Charpy 23°C, V-notch Edgew 80104 sp=62mm*	16	kJ/m²	ISO 179/1eA
Izod Impact, notched, 23°C	78	J/m	ASTM D256

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, break, 5 mm/min	92	MPa	ISO 527
Tensile Strain, yield, 5 mm/min	1.2	%	ISO 527
Tensile Modulus, 1 mm/min	6650	MPa	ISO 527
Tensile Stress, yield	122	MPa	SABIC - Japan Method
Tensile Strain, break	10	%	SABIC - Japan Method
Flexural Stress	166	MPa	ASTM D790
Flexural Modulus	8620	MPa	ASTM D790

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Mold Shrinkage, flow, 24 hrs	0.77	%	ISO 294
Mold Shrinkage, xflow, 24 hrs	0.14	%	ISO 294
Specific Gravity	1.48	-	ASTM D792
Water Absorption, (23°C/24hrs)	0.02	%	ASTM D570
Mold Shrinkage, flow, 3.2 mm	0.3 - 0.7	%	SABIC method
Melt Flow Rate, 300°C/5.0 kgf	43.6	g/10 min	ASTM D1238

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	233	°C	ISO 75/Af
HDT, 1.82 MPa, 6.4 mm, unannealed	255	°C	ASTM D648
CTE, -30°C to 30°C	0.000018 - 0.000058	1/°C	TMA

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES

NORYL GTX™ Resin APS430

Product Family

Polymer Family

Processing Technology

Where to buy

Colors

Features

Industry

Applications

Technical Datasheet Data

ELECTRICAL

FLAME CHARACTERISTICS

IMPACT

INJECTION MOLDING

MECHANICAL

PHYSICAL

THERMAL

ELECTRICAL

FLAME CHARACTERISTICS

IMPACT

MECHANICAL

PHYSICAL

THERMAL

Related Documents

Technical Data Sheets

Register for High value Multi-Point Data