NORYL GTX™ Resin GTX1040A

GTX1040A resin is a glass fiber and glass beads reinforced alloy of Polyphenylene Ether (PPE) + Polyamide (PA). This injection moldable grade is featured with high stiffness and low density, excellent chemical resistance, and high heat resistance. GTX1040A is suitable for the applications of consumer electronic components, wearable devices and drones.

Product Family

NORYL™ RESINS

Polymer Family

Polyphenylene Ether + PA (PPE+Nylon)

Processing Technology

Injection Molding

Where to buy

You can get in touch with us in these regions to buy the material

Colors

All colors are customizable. Refer our ColorXpress tool to check color availability

+more

Features

Key characteristics of the material

Chemical Resistance
Dimensional stability
High Flow
High stiffness/Strength
Low Specific Gravity

Industry

Material previously used in

Drone Solutions
Electronic Components
Mobile Phone - Computer - Tablets
Speaker - Earphone

Applications

Possible usage of material

Wearables
Automotive
Drone
Mobile Phone

Technical Datasheet Data

View different characteristics of the material at a standard test conditions

Region

ELECTRICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Surface Resistivity	5.1E14	Ω/sq	ASTM D257
Volume Resistivity	1.2E14	Ω.cm	ASTM D257

IMPACT

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Izod Impact, notched, 23°C	65	J/m	ASTM D256
Izod Impact, notched, -30°C	57	J/m	ASTM D256
Izod Impact, unnotched, 23°C	469	J/m	ASTM D4812
Izod Impact, unnotched, -30°C	441	J/m	ASTM D4812
*Izod Impact, notched 80104 +23°C*	6.1	kJ/m²	ISO 180/1A
*Izod Impact, notched 80104 -30°C*	5.5	kJ/m²	ISO 180/1A
*Izod Impact, unnotched 80104 +23°C*	28.7	kJ/m²	ISO 180/1U
*Izod Impact, unnotched 80104 -30°C*	27.2	kJ/m²	ISO 180/1U

INJECTION MOLDING

PROPERTIES	TYPICAL VALUES	UNITS
Drying Temperature	100 - 120	°C
Drying Time	3 - 5	Hrs
Melt Temperature	260 - 320	°C
Nozzle Temperature	250 - 320	°C
Front - Zone 3 Temperature	260 - 320	°C
Middle - Zone 2 Temperature	260 - 320	°C
Rear - Zone 1 Temperature	260 - 320	°C
Mold Temperature	75 - 150	°C
Back Pressure	0.2 - 1.6	MPa
Screw Speed	20 - 100	rpm

MECHANICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Tensile Stress, brk, Type I, 5 mm/min	88	MPa	ASTM D638
Tensile Strain, brk, Type I, 5 mm/min	2.98	%	ASTM D638
Tensile Modulus, 5 mm/min	7448	MPa	ASTM D638
Flexural Strength, 1.3 mm/min, 50 mm span	145	MPa	ASTM D790
Flexural Modulus, 1.3 mm/min, 50 mm span	6420	MPa	ASTM D790
Tensile Stress, break, 5 mm/min	90	MPa	ISO 527
Tensile Strain, break, 5 mm/min	2.9	%	ISO 527
Tensile Modulus, 1 mm/min	7283	MPa	ISO 527
Flexural Strength, 2 mm/min	141	MPa	ISO 178
Flexural Modulus, 2 mm/min	6442	MPa	ISO 178

PHYSICAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
Specific Gravity	1.12	-	ASTM D792
Density	1.12	g/cm³	ISO 1183
Melt Flow Rate, 300°C/5.0 kgf	30	g/10 min	ASTM D1238
Water Absorption, (23°C/24hrs)	0.4	%	ISO 62-1
Moisture Absorption, (23°C/50% RH/24hrs)	0.09	%	ISO 62-4
Mold Shrinkage, flow	0.34	%	SABIC method
Mold Shrinkage, xflow	0.51	%	SABIC method

THERMAL

PROPERTIES	TYPICAL VALUES	UNITS	TEST METHODS
HDT, 0.45 MPa, 3.2 mm, unannealed	214	°C	ASTM D648
HDT, 1.82 MPa, 3.2mm, unannealed	194	°C	ASTM D648
*HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm*	214	°C	ISO 75/Bf
*HDT/Af, 1.8 MPa Flatw 80104 sp=64mm*	191	°C	ISO 75/Af
CTE, -40°C to 40°C, flow	2.7E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, xflow	7.4E-5	1/°C	ASTM E831
CTE, -40°C to 40°C, flow	2.8E-5	1/°C	ISO 11359-2
CTE, -40°C to 40°C, xflow	7.1E-5	1/°C	ISO 11359-2

Register for High value Multi-Point Data

Access validated product data to streamline material selection
Get inspired by innovative application ideas
Register for high value multi-point data and a personalized experience

THIS SITE USES COOKIES